| Characteristic |
Description |
 | |
| Platform | Supermicro AS-2125HS-TNR Server Platform |
| Server Board | MBD-H13SSH
One or two AMD EPYC 9004 processors (Genoa/Bergamo), maximum TDP 400W
24 slots for installing DDR5-4800 memory modules
16 SATA ports, 3 USB 3.0 ports, IPMI, 2 M.2 PCIe 2280/22110 slots
2 PCIe 5.0 x16 slots for installing riser cards, PCIe 5.0 x16 OCP 3.0 slot, 128 PCIe 5.0 lanes
20 PCIe 5.0 x4 ports for connecting NVMe/SATA drives or riser cards (10 MCIO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Server Chassis | CSE-HS219-R1K63P-A |
| Form Factor | 2U, rack mountable
Rails included |
| Processor | 2 AMD EPYC 9004 processors with a maximum TDP of 400W, support for AMD 3D V-Cache Technology
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU (64 lanes used as interprocessor interface)
Supports ECC DDR5-4800 memory, up to 6 TB per CPU, integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (24 x 64 GB)
for RDIMM 3DS - 6144 GB (24 x 256 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 24 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Controller | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- network module with installation in a socket on the OCP 3.0 motherboardPCIe 5.0 x16 fromCPU
- up to four network adapters in standard expansion slotsPCIe 5.0 x16 |
| Expansion Slots | 4 slotsPCIe 5.0 x16/x16 full height full length double width (FHFLDW, via riser cards (installation kit required!)
SlotPCIe 5.0x16 OCP 3.0 on the motherboard for installing a network module, connecting toCPU |
| Disk Subsystem Controller | Integrated SATA controller, 16 ports 6Gb/s, MCIO x8 connector (CPU)
12 NVMe PCIe 5.0 x4 ports, 6 MCIO x8 (CPU) slots
2 x M.2 2280/22110 PCIe 3.0 x4 SSD slots on motherboard (from CPU#1 and CPU#2)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives;
- Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 24 hot-swappable 2.5" SAS3/SATA3/NVMe Gen5 U.2/U.3 HDD/SSD drives in a cage on the front panel of the server.
Connectors on the basket for connecting cables:
- 6 SLIMLINE x4 connectors for SAS3/SATA drives;
- 12 MCIO x8 slots for NVMe PCIe 5.0 x4 drives (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated SATA controller of the CPU using MCIO x8 -> 2 x SLIMLINE x4 cables (up to 16 drives, additional cables required).
For SATA and/or SAS drives:
to SAS RAID controller or HBA with SLIMLINE x8 -> 2 x SLIMLINE x4 cables(up to 24 drives, additional cables required);
- to the Tri-Mode controller using SLIMLINE x8 -> 2 x SLIMLINE x4 cables (up to 24 drives, additional cables required).
For NVMe drives:
- to 24 PCIe 5.0 x4 ports via MCIO x8 and x16 connectors on the motherboard fromCPU MCIO x8/x16 -> MCIO x8 cables (up to 24 drives, each pair of drives requires an additional cable);
- to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 4 drives per controller, an additional cable is required for each pair of drives). |
| Additional Storage | Up to two M.2 2280/22110 drives installed in slots on the motherboard:
- PCIe 3.0 x4 from CPU#1
- PCIe 3.0 x4 from CPU#2
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported |
| Interfaces | DB-15 video connector, rear panel
1Gb Ethernet RJ-45 management port, rear panel
2 USB 3.0 ports on the rear panel |
| Video Adapter | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install two GPUs or video cards, including double-width ones |
| Control Panel | Control buttons: Power On/Off, UID
Indication: Power Status LED, System Information LED, Network activity LED, HDD LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor
The server comes with a license for remote BIOS update (SFT-OOB-LIC) |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1600W Titanium (AC) redundant hot-swappable power supplies |
| System Cooling | 4 x 80mm hot-swappable system fans |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 76.0 cm |
| Weight | 18 kg, in packaging 33 kg (platform) |
| Power Supply Parameters | 200-240Vac / 7.5 - 6A / 50-60Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |