| Characteristic |
Description |
 | |
| Platform | Supermicro AS-F2014S-RNTR Server Platform, FatTwin Series |
| Server Board | Super H12SSFR-AN6 |
| Server Chassis | SuperChassis CSE-F424AS3-R2K20BP |
| Form Factor | 4U, rack mountable
4 independent dual-processor servers (nodes) in a single 4U chassis with a common power subsystem (4 x 2'200 W). |
| Processor | For each computing node:
1 x AMD EPYC 7002/7003 processor with max TDP 280W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes (supported by processor and platform)
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller |
| Chipset | For each computing node:
System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | For each computing node:
Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 1024GB (8x128GB), for LRDIMM - 2048GB (8x256GB)
Eight-channel memory controller, 8 DIMM slots (1 module per channel)
Memory subsystem bandwidth 204.8 GB/s |
| Network Controller | For each computing node:
Replacement AIOM (Supermicro I/O Module)
Possible network interface options: 1Gb/10Gb/40Gb/100Gb Ethernet
Number of ports 1 / 2 / 4 (depending on interface type)
Dedicated management port RJ45 Dedicated IPMI LAN port
Additionally, a network adapter in the expansion slot |
| Expansion Slots | For each computing node:
1 PCIe 4.0 x16/x16 Low-Profile slot, CPU connection
1 PCIe 4.0 x16/x16 slot for AIOM network module, connected to CPU |
| Disk Subsystem Controller | For each computing node:
Integrated processor SATA controller 6Gb/s, 14 ports (2 x SLIMLINEx4, 2 SATA DOM), port connections:
- 8 ports (2 x SLIMLINEx4) to front (6) and rear (2) panel drives;
- 4 SATA ports to M.2 slots on the system board (2260/2280/22110), combined with M.2 PCIe 4.0 x4 ports;
- 2 SATA ports to SATA DOM connectors on the system board.
8 PCIe 4.0 x4 ports (4 x SLIMLINE x8) for front and rear NVMe drives (2 rear drives connected)
Additionally, an expansion board with external SAS3 12Gb/s or FC ports for connecting external storage systems or disk shelves.
RAID controller LSI3908, 8 internal SAS3 ports, RAID 0/1/10/5/50/6/60 with cable set, in expansion slot (optional) |
| Disk Subsystem | For each computing node:
- Up to 6 hot-swappable 3.5"/2.5" SAS3/SATA3/NVMeG4 HDD/SSD drives in front panel cage
Up to 2 hot-swappable 3.5"/2.5" SAS3/SATA3/NVMeG4 HDD/SSD drives in the rear panel cage
For 2.5" hot-swappable drives, 3.5"->2.5" adapter sleds are required
Front panel NVMe drives require cables
SAS drives require a controller and cables
It is possible to replace the 3.5" rear panel basket with a 2.5" basket with a riser card for 2 PCIe 4.0 x8 LP slots |
| Additional Storage | For each computing node:
- up to 2 SATA DOM drives in motherboard slots, RAID 0/1 support
- up to 4 M.2 2260/2280/22110 PCIe 4.0 x4 /SATA drives in slots on the motherboard |
| Optical Storage | External only with USB connection |
| Interfaces | For each compute node on the rear panel:
- DB-15 video connector
- 1, 2 or 4 network ports depending on the type of AIOM module installed
- RJ-45 control port
- 2 USB 3.0 ports
- 1 serial port (internal) |
| Video Adapter | For each computing node:
Integrated graphics controller based on ASPEED AST2600 BMC |
| Control Panel | For each computing node:
Control buttons: Power On/Off, UID
LED indication: Power status, HDD activity, Network activity, Universal Information (UID, Fan failure, Overheat) |
| Management and Monitoring | For each computing node:
Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 BMC
Dedicated RJ-45 management port |
| Supported Operating Systems | Current list |
| Power Unit | 4 x 2200W 80 Plus Platinum hot swappable power supplies, PMBus |
| System Cooling | For each computing node:
2 x 80mm system fans, dual rotor, fixed mount |
| Dimensions | Height 17.7 cm, width 44.8 cm, depth 73.7 cm |
| Weight | Platform: 68 kg, 91 kg in packaging |
| Power Supply Parameters | 100-240 VAC, 10.0 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |