Characteristic |
Description |
 |  |
Platform | Supermicro ASG-1014S-ACR12N4H Server Platform |
Server Board | Super H12SSW-NTR |
Server Chassis | CSE-802TS-R804WBP |
Form Factor | 1U, rack mountable Rails included |
Processor | x AMD EPYC 7002/7003 processor with max TDP 240W Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode) Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1 Support for Precision Boost technologies, SMT multi-threading 2 x 128-bit FMAC compute units (4 floating point instructions per cycle) 128 PCIe 4.0 lanes Supports ECC DDR4-3200 memory, up to 4TB, integrated eight-channel memory controller |
Chipset | System on Chip (SoC) (the chipset is built into the processor) |
System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) Memory operating frequency 3200 MT/s Maximum capacity: for RDIMM - 2048GB (16x128GB), for LRDIMM - 4096GB (16x256GB) Eight-channel memory controller, 16 DIMM slots (2 modules per channel) Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
Network Controller | Integrated network controller Broadcom BCM57416, 2 ports 10Gb Ethernet 10GBase-T (RJ-45) Dedicated management port RJ45 Dedicated IPMI LAN port Additionally: - up to two network adapters in standard expansion slotsPCIe 5.0 x16 |
Expansion Slots | x PCIe 4.0 x16/x16 full-height half-length (FHHL) via riser card 1 PCIe 4.0 x16/x16 Low Profile via riser card |
Disk Subsystem Controller | RAID SAS adapter Broadcom 3916, PCIe 4.0 x8, 16 SAS3 12Gb/s ports, 2 SLIMLINE x8 connectors, RAID 0/1/10/5/6/50/60, 8GB Cache Integrated SATA controller, 16 x 6Gb/s ports, 2 x SLIMLINE x8 connectors, combined with 4 x NVMe PCIe 4.0 x4 ports 2 x M.2 2280/22110 PCIe 4.0 x2 SSD slots on motherboard Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter): - RAID controller, HBA adapter or Tri-Mode controller in the PCIe 4.0 expansion slot for SAS3 and/or SATA drives; - Tri-Mode controller for an alternative option for connecting NVMe drives to PCIe 4.0 expansion slots. |
Disk Subsystem | Up to 12 hot-swappable 3.5"/2.5" SAS3/SATA3 HDD/SSD drives in internal cage (2.5" drives via adapters) Connectors on the basket for connecting cables: - 3 SLIMLINE x4 connectors for SAS3/SATA drives Storage device connection options: For SATA and/or SAS drives: - to SAS RAID controller LSI 3916 (16 SAS ports 12Gb/s, RAID 0/1/10/5/6/50/60, 8GB Cache) with two cables SLIMLINE x8 -> 2 x SLIMLINE x4(connected for 12 drives) Up to 4 hot-swappable 2.5" NVMe Gen4 U.2/U.3 drives no taller than 7mm in a cage on the front panel of the server Connectors on the basket for connecting cables: - 4 SLIMLINE x4 connectors for NVMe drives Storage device connection options: For NVMe drives: - to four PCIe 4.0 x4 ports via two SLIMLINE x8 connectors on the motherboard fromCPU cables SLIMLINE x8 -> 2 x SLIMLINE x4 (connected for 4 drives); - to the Tri-Mode controller using SLIMLINE x8 -> 2 x SLIMLINE x4 cables (up to 4 drives per controller, an additional cable is required for each pair of drives). |
Additional Storage | Up to 2 M.2 2280/22110 drives with PCIe 4.0 x2 interface in slots on the motherboard Up to 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage in the form of a PCIe 3.0 x8 expansion card Up to 4 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage in the form of a PCIe 3.0 x8 expansion card Up to 2 x M.2 2280/22110 PCIe 3.0 x4 or SATA drives when installed in an expansion card with Boot RAID 0/1 support based on Broadcom SAS3408 |
Optical Storage | Not supported |
Interfaces | DB-15 video connector, rear panel x 10Gb Ethernet RJ-45 network ports, on the rear panel 1Gb Ethernet RJ-45 management port, rear panel 4 USB 3.0 ports on the rear panel 2 USB 2.0 ports on the front panel 1 serial port on rear panel |
Video Adapter | Integrated ASPEED AST2600 BMC Graphics controller |
Control Panel | Control buttons: Power On/Off, Reset Indication: Power Status LED, HDD activity LED, 2 x Network activity LED, System Information LED |
Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0) Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC) Monitoring voltages, temperatures, fan speeds Case opening sensor The server comes with a license for remote BIOS update (SFT-OOB-LIC) |
Supported Operating Systems | Current list |
Power Unit | 2 x 800W Platinum Hot-Swap Redundant Power Supplies (AC) |
System Cooling | x 40mm fixed mount, dual rotor, high performance system fans |
Dimensions | Height 4.3 cm, width 43.7 cm, depth 94.0 cm |
Weight | 17.9 kg, in packaging 26.3 kg (platform) |
Power Supply Parameters | 200 - 240Vac / 4.5 - 3.8A / 50-60Hz |
Operating Environment | Operating temperature from +10°C to +35°C Storage temperature from -40°C to +60°C Operating relative humidity from 8% to 90% Relative humidity during storage from 5% to 95% |
Warranty | Standard 36 months warranty, service at the service center |