| Characteristic |
Description |
 | |
| Platform | Supermicro ASG-2015S-E1CR24H Server Platform |
| Server Board | MBD-H13SSW
One AMD EPYC 9004 processor (Genoa/Bergamo), max TDP 360W
12 slots for installing DDR5-4800 memory modules
16 SATA ports, 2 USB 3.0 ports, IPMI, 2 M.2 PCIe 2280/22110 slots
2 PCIe 5.0 x16 slots for installing riser cards, 2 PCIe 5.0 x16 OCP 3.0 slots, 128 PCIe 5.0 lanes
16 PCIe 5.0 x4 ports for connecting NVMe/SATA drives or riser cards (8 MCIO x8 connectors)
Baseboard Management Controller Aspeed AST2600 |
| Server Chassis | SuperChassis CSE-826S3TS-R1K62P1 |
| Form Factor | 2U, rack mountable |
| Processor | 1 x AMD EPYC 9004 processor with max TDP 290W
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU
Supports ECC DDR5-4800 memory, up to 6 TB per CPU, integrated 12-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 768 GB (12 x 64 GB)
- for RDIMM 3DS - 3072 GB (12 x 256 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 12 memory modules per server
Memory subsystem bandwidth 460.8 GB/s |
| Network Controller | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network modules with installation in the connectors on the OCP 3.0 motherboardPCIe 5.0 x16 fromCPU
- up to four network adapters in standard expansion slotsPCIe 5.0 x16 |
| Expansion Slots | Total of 6 PCIe 5.0 slots for full-height, half-length expansion cards:
- Slot 1: PCIe 5.0 x16/x16
- Slot 1: PCIe 5.0 x8/x16, occupied by SAS SAS RAID LSI3908
- Slot 3: PCIe 5.0 x16/x16
- Slot 4: PCIe 5.0 x8/x16
- Slot 5: PCIe 5.0 x16/x16
- Slot 6: PCIe 5.0 x16/x16 |
| Disk Subsystem Controller | RAID SAS adapter Broadcom 3908, PCIe 4.0 x8, 8 ports SAS3 12Gb/s, 1 connector SLIMLINE x8, RAID 0/1/10/5/6/50/60, 8GB Cache
16 NVMe PCIe 5.0 x4 ports, 8 MCIO x8 (CPU) connectors, used to connect expansion slots and SATA ports
2 x M.2 2280/22110 PCIe 3.0 x2 SSD slots on motherboard
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller in the PCIe 5.0 expansion slot for SAS3 and/or SATA drives; |
| Disk Subsystem | Up to 24 hot-swappable 3.5"/2.5" SAS3/SATA3 HDD/SSD drives in front panel cage and top-loading cage (both cages with port expander)
Connectors on each basket for connecting cables:
- 2 SLIMLINE x4 connectors for SAS3/SATA3 drives and 2 SLIMLINE x4 connectors for outgoing connections
Storage device connection options:
For SATA and/or SAS drives:
- to the Broadcom 3908 SAS RAID controller (8 SAS3 12Gb/s ports, 1 SLIMLINE x8 connector, RAID 0/1/10/5/6/50/60, 8GB Cache) with a SLIMLINE x8 -> 2 x SLIMLINE x4 cable (connected for all 24 drives);
Up to 2 hot-swappable 2.5" SATA3 SSDs in a cage on the back of the server
Connectors on the basket for connecting cables:
- 2 7-Pin SATA connectors for SAS3/SATA3 drives;
Storage device connection options:
For SATA drives:
- to the integrated SATA controller via MCIO x8 -> 2 x 7-Pin SATA cable (connected for 2 drives);
to SAS RAID controller or HBA with HD Mini-SAS -> 4 x 7-Pin SATA cable (additional cable required);
to the Tri-Mode controller using the HD Mini-SAS -> 7-Pin SATA or SLIMLINE x8 -> 7-Pin SATA cable (depending on the controller model, an additional cable is required). |
| Additional Storage | Up to two M.2 PCIe 3.0 x2 2280/22110 drives installed in motherboard slots, connected to CPU
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported |
| Interfaces | DB-15 video connector, rear panel
1GbE RJ-45 management port, rear panel
2 USB 3.0 ports on the rear panel
1 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2600 BMC Graphics controller
One or two graphic adapters (see configurator) |
| Control Panel | On the front panel:
- control buttons: Power, UID
- indication: Power LED, Power Fail LED, System Information LED, Drive activity LED, LAN Activity LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds, case intrusion sensor |
| Supported Operating Systems | Current list |
| Power Unit | 2 x Redundant Hot-Swap Power Supplies 1600W 80 Plus Titanium, PMBus |
| System Cooling | 4 x 8cm hot-swappable high-efficiency system fans, 13.5K RPM |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 86.3 cm |
| Weight | 23.6 kg, in packaging 33.8 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 4.2-1.8 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |