| Characteristic |
Description |
 | |
| Platform | Supermicro CSE-213XAC-R1K05LP Server Chassis |
| Server Board | SUPERMICRO Single or Dual Processor Board for AMD EPYC 7002 (Rome) or AMD EPYC 7003 (Milan) CPUs
Possible options:
MBD-H12SSL-i 1xEPYC 7002/7003/8D 8SATA/8x7P+8SATA|2NVMe/1xSL8 2xM.2/PCIe 7xPCIe 2x 1GbE/BCM 12x10"
MBD-H12SSL-NT 1xEPYC 7002/7003/8D 16SATA|4NVMe/2xSLIMLINEx8 2xM.2/PCIe 7xPCIE 2x10GbE/BCM 12x10"
MBD-H12SSL-C 1xEPYC 7002/7003/8D 8SATA/8x7P+8SAS/3008/2xHD-MS 2xM.2/PCIe 7xPCIe 2x 1GbE/BCM 12x10"
MBD-H12SSL-CT 1xEPYC 7002/7003/8D 8SATA/8x7P+8SAS/3008/2xHD-MS 2xM.2/PCIe 7xPCIE 2x10GbE/BCM 12x10"
MBD-H12DSI-N6 2xEPYC 7002/7003/16D 10SATA/10x7Pin+4NVMe/2xSLIMx8 1xM.2/PCIe 6xPCIe 2x 1GbE/BCM 12x13"
MBD-H12DSI-NT6 2xEPYC 7002/7003/16D 10SATA/10x7Pin+4NVMe/2xSLIMx8 1xM.2/PCIe 6xPCIe 2x10GbE/BCM 12x13" |
| Form Factor | 2U, 19" rack mount, rails included |
| Processor | 1 or 2 AMD EPYC 7002/7003 processors
For each processor:
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes per CPU, 64 of which are used as interprocessor interface (only for dual-socket motherboards)
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller
Processors with the "P" index are supported only in single-socket motherboards.
Processors without an index are supported in single-socket and dual-socket motherboards. |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 1024GB (16x64GB), for LRDIMM - 4096GB (16x256GB)
Eight-channel memory controller per processor, 8 or 16 DIMM slots (8 slots per CPU)
Memory subsystem bandwidth 204.8 GB/s per processor
The number of RAM modules should not exceed the number of memory slots on the motherboard. |
| Network Controller | Network controller integrated into the motherboard.
2 Ethernet ports 1Gb or 10Gb (RJ-45)
Dedicated Management Port (IPMI)
Additional network controllers in PCI-E slots |
| Expansion Slots | Up to 7 PCI-E 4.0 x8/x16 slots (depending on motherboard selected) for low-profile expansion cards
Some slots can only be used when installing a second processor (in the case of a dual-processor motherboard) |
| Disk Subsystem Controller | Integrated SATA controller, number of ports and type of connectors depending on the model of the selected motherboard.
Additional RAID controllers or HBA adapters from the configurator list |
| Disk Subsystem | 16-drive cage for 2.5" SAS2/SATA3 HDD/SSD 6Gb/s hot-swappable drives without port expander (4 x HD Mini-SAS connectors)
Additionally:
- basket for 4 2.5" SAS3/SATA3 HDD/SSD 12Gb/s hot-swappable drives in a 5.25" bay (4 x 7-Pin SATA connectors)
- basket for 1 2.5" SATA3 SSD (H=7mm) with hot swap in DVD bay (7-Pin SATA connector)
- basket for 1 2.5" SATA3 SSD drive (H=7mm) with fixed installation in the DVD bay
- basket for 1 2.5" SATA3 SSD drive (H=7mm) with fixed installation in the USB bay |
| Additional Storage | Up to two SATA DOM (Disk-On-Module) drives in motherboard slots
One or two M.2 2280/22110 drives with interfacePCIe 4.0 x4 into the socket on the motherboard
Up to two M.2 2280/22110 PCIe 3.0 x4 drives in a PCIe 3.0 x8 expansion card, software RAID only
Up to two M.2 2280/22110 drives with PCIe 3.0 x4 or SATA interface in a PCIe 3.0 x8 expansion card, support for Boot RAID 0/1 via Broadcom SAS3408 |
| Optical Storage | SATA DVD-RW Optical Drive, option |
| Interfaces | On the back panel:
- DB-15 video connector
- 2 network ports 1 GbE or 10GbE RJ-45
- 1GbE RJ-45 management port
- 1 serial port
- USB ports (number and type depending on the selected motherboard)
On the front panel (optional):
- USB 2.0 or USB 3.0 ports
- 1 serial port |
| Video Adapter | Integrated motherboard graphics video controller based on ASPEED AST2600 or ASPEED AST2500 |
| Control Panel | Control buttons: Power, Reset
LED indication: Power Status, Power Fail, HDD activity, 2 Network activity, System Information |
| Management and Monitoring | Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1000W Redundant Hot-Swap Power Supplies, Titanium |
| System Cooling | x 80x80x38 mm, 10.5K RPM, variable speed, redundant, hot swappable fans |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 65.0 cm |
| Power Supply Parameters | 100-240 V, 50-60 Hz, 7.5 A Max |
| Operating Environment | Operating temperature from +5°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |