| Characteristic |
Description |
 | |
| Platform | Supermicro CSE-216BAC4-R1K23LPB Server Chassis |
| Server Board | SUPERMICRO Single or Dual Processor Board for AMD EPYC 7002 (Rome) or AMD EPYC 7003 (Milan) CPUs
Possible options:
MBD-H13SSL-N 1xEPYC 9004/9005/400W/12D 16SATA/1M8+8x7P 2xM.2/6NVMe/3M8 5xPCIe 5.0 2x 1GbE/BCM 12x10" |
| Form Factor | 2U, 19" rack mount, rails included |
| Processor | 2 AMD EPYC 9004 processors with a maximum TDP of 400W, support for AMD 3D V-Cache Technology
Processor socket Socket SP5 (LGA 6096), AMD Zen 4 (Genoa/Bergamo) architecture, 5 nm process technology
Up to 128 cores, 256 threads, operating frequency up to 4.1 GHz (maximum 4.4 GHz in Boost mode)
Up to 1152 MB L3 cache per CPU, per core: 1024 KB L2, 32 KB (I)+ 32 KB (D) L1
Support for AMD Infinity Guard, AMD Infinity Architecture technologies
128 PCIe 5.0 lanes per CPU (64 lanes used as interprocessor interface)
Supports ECC DDR5-4800 memory, up to 6 TB per CPU, integrated 12-channel memory controller
Processors with the "P" index are supported only in single-socket motherboards.
Processors without an index are supported in single-socket and dual-socket motherboards. |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Maximum RAM (the processor supports a maximum of 6TB of RAM):
- for RDIMM - 1536 GB (24/12 x 64 GB)
- for RDIMM 3DS - 6144 GB (24/12 x 256 GB)
Memory modes: 4800 MT/s (1 DPC)
Integrated 12-channel memory controller (IMC) on the processor
Total 12 channels per CPU, one memory module per channel (1 DPC)
Total 12 memory modules per CPU, 24/12 memory modules per server
Memory subsystem bandwidth 460.8 GB/s
The number of RAM modules should not exceed the number of memory slots on the motherboard. |
| Network Controller | Network controller integrated into the motherboard.
2 Ethernet ports 1Gb or 10Gb (RJ-45)
Dedicated Management Port (IPMI)
Additional network controllers in PCI-E slots |
| Expansion Slots | Up to 7 PCI-E 5.0 x8/x16 slots (depending on motherboard selected) for low-profile expansion cards
Some slots can only be used when installing a second processor (in the case of a dual-processor motherboard) |
| Disk Subsystem Controller | Integrated SATA controller, number of ports and type of connectors depending on the model of the selected motherboard.
PCIe 5.0 x4 ports for connecting NVMe drives (number of ports depends on motherboard model), MCIO x8 connectors
Additional RAID controllers or HBA adapters from the configurator list
Connecting NVMe drives to motherboard SLIMLINE ports, HBA or Tri-Mode controller with a choice of appropriate cables |
| Disk Subsystem | 24-disk cage with 2.5" SAS2/SATA3 12Gb/s hot-swappable without port expander (direct connection, 6 x HD Mini-SAS connectors),
including up to 4 2.5" NVMe SSD drives (4 x HD Mini-SAS White connectors).
Additionally:
- basket for 2 2.5" SAS3/SATA3 HDD/SSD 12Gb/s hot-swappable drives on the rear panel (2 x 7-Pin SATA connectors) |
| Additional Storage | Up to two SATA DOM (Disk-On-Module) drives in motherboard slots
One or two M.2 2280/22110 drives with interfacePCIe 4.0 x4 into the socket on the motherboard
Up to two M.2 2280/22110 PCIe 3.0 x4 drives in a PCIe 3.0 x8 expansion card, software RAID only
Up to two M.2 2280/22110 drives with PCIe 3.0 x4 or SATA interface in a PCIe 3.0 x8 expansion card, support for Boot RAID 0/1 via Broadcom SAS3408 |
| Optical Storage | External only via USB port |
| Interfaces | On the back panel:
- DB-15 video connector
- 2 network ports 1 GbE or 10GbE RJ-45
- 1GbE RJ-45 management port
- 1 serial port
- USB ports (number and type depending on the selected motherboard) |
| Video Adapter | Integrated motherboard graphics video controller based on ASPEED AST2600 or ASPEED AST2500 |
| Control Panel | Control buttons: Power, Reset
LED indication: Power Status, Power Fail, HDD activity, 2 Network activity, System Overheat |
| Management and Monitoring | Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1200W Redundant Hot-Swap Power Supplies, Titanium |
| System Cooling | x 80x80x38 mm, 10.5K RPM, variable speed, redundant, hot swappable fans |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 63.0 cm |
| Power Supply Parameters | 100-240 V, 50-60 Hz, 11.0-4.4 A |
| Operating Environment | Operating temperature from +5°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |