| Characteristic |
Description |
 | |
| Platform | Server platform based on Supermicro CSE-815TQC-R706WB case and motherboard (list of options below) |
| Server Board | It is possible to select one of the following server board models in the configurator:
MBD-H12SSW-iN SM MBD 1xAMD EPYC 7002/7003/240W 8D PCIe-RISER 2xNVMe+16xSATA/4xNVMe 2xM.2 2x1G WIO/8.2x13.05
MBD-H12SSW-NT SM MBD 1xAMD EPYC 7002/7003/240W 8D PCIe-RISER 2xNVMe+16xSATA/4xNVMe 2xM.2 2x10G WIO/8.2x13.05 |
| Server Chassis | CSE-815TQC-R706WB |
| Form Factor | 1U, rack mountable
Rails included |
| Processor | x AMD EPYC 7002/7003 processor with max TDP 240W
Processor socket Socket SP3, AMD Zen 2 (Rome) / Zen 3 (Milan) architecture, 7 nm process technology
Up to 64 cores, 128 threads, operating frequency up to 3.7 GHz (maximum 4.1 GHz in Boost mode)
Up to 256MB L3 cache per CPU, per core: 512KB L2, 64KB (I)+ 32KB (D) L1
Support for Precision Boost technologies, SMT multi-threading
2 x 128-bit FMAC compute units (4 floating point instructions per cycle)
128 PCIe 4.0 lanes
Supports ECC DDR4-3200 memory, up to 4TB per CPU, integrated eight-channel memory controller |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM)
Memory operating frequency 3200 MT/s
Maximum capacity: for RDIMM - 1024GB (8x128GB), for LRDIMM - 2048GB (8x256GB)
Eight-channel memory controller, 8 DIMM slots
Memory subsystem bandwidth from 85.3 GB/s to 204.8 GB/s depending on the processor model |
| Network Controller | Integrated network controller 2 ports 1Gb or 10Gb Ethernet RJ-45 based on Broadcom BCM5720 or BCM57416 (depending on the selected motherboard model).
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | 2 x PCIe 4.0 x16/x16 full-height full-length (FHFL) slots via riser card
1 PCIe 4.0 x16/x16 Low Profile via riser card |
| Disk Subsystem Controller | Integrated SATA controller, 16 x 6Gb/s ports, 2 x SLIMLINE SAS x8 connectors on motherboard, combined with 4 x NVMe PCIe 3.0 x4 ports
Two Native NVMe PCIe 4.0 x4 ports, SLIMLINE SAS x8 connector on motherboard
2 x 7-pin SATA ports with SATA DOM support with onboard power on motherboard
2 x M.2 2280/22110 PCIe 3.0 x2 or SATA SSD slots on motherboard
1 USB 3.0 (Type A) on motherboard for eUSB storage
Additionally: SAS RAID controllers or SAS/FC HBA adapters from the configurator list in expansion slots |
| Disk Subsystem | Up to 4 hot-swappable 3.5" SATA3/SAS3 HDD/SSD in front panel cage
It is possible to install 2.5" SATA/SAS HDD/SSD drives via 2.5"->3.5" adapter sleds
Additionally, up to 2 x 2.5" SATA3/SAS3 SSD drives up to 7mm high with hot swap in DVD and FDD bays (additional cages required) |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives to SATA connectors on the motherboard
Up to 2 M.2 2280/22110 PCIe 3.0 x2 drives in a slot on the motherboard OR
Up to 2 M.2 2280/22110 drives with SATA interface
Up to 4 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card) |
| Optical Storage | SATA DVD-RW Optical Drive, optional, requires installation kit |
| Interfaces | DB-15 video connector, rear panel
x 10Gb Ethernet RJ-45 network ports, on the rear panel
1Gb Ethernet RJ-45 management port, rear panel
7 USB 3.0 ports: 4 rear, 1 internal Type A, 2 internal (optional with front panel output)
1 serial port on rear panel, 1 port internal (optional with front panel output) |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2 x Network activity LED, System Overheat LED / Fan Fail LED / UID LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds
Case opening sensor |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 750W Platinum Hot-Swap Redundant Power Supplies (AC) |
| System Cooling | x 40mm Fixed Mount System Fans, 13K RPM
Additionally, up to 2 x 40mm fixed-mount system fans for expansion card cooling |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 59.7 cm |
| Weight | 9.1 kg, in packaging 15.0 kg (platform) |
| Power Supply Parameters | 100 - 240Vac / 6.0 - 3.0A / 50-60Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |