Supermicro SSG-1029P-NES32R. Technical specifications [EOL]

ENG | RUS

	This platform is only available as a turnkey solution from SuperMicro. Minimum configuration: - 2 processors - 2 memory modules 4 NVMe EDSFF Long 9.5mm drives Purpose: - I/O intensive applications - Databases - Hot Data Cache Storage for Big Data - Server for 1C

Platform characteristics SSG-1029P-NES32R

Characteristic	Description

Platform	Supermicro SSG-1029P-NES32R Server Platform
Server Board	Super X11DSF-E
Server Chassis	SuperChassis CSE-121EF-R1K62P
Form Factor	1U, rack mountable Server/flash storage system Up to 32 hot-swappable EDSFF (ruler) drives. Up to 10M IOPS, up to 39 GB/s Transfer Rate.
Processor	Intel Xeon Scalable processors with a maximum TDP of 205W Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies Interprocessor interface UPI 9.6-10.4GT/s (3 links), 48 PCIe 3.0 lanes, DMI 3.0 Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC)
Chipset	Intel C627 Chipset
System Memory	Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU) Maximum capacity: for RDIMM - 768 GB, for LRDIMM - 3072 GB Six-channel memory controller, 24 DIMM slots (12 per processor) Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) per processor
Network Controller	Integrated network controller, 2 ports 10Gb Ethernet RJ-45 10GBASE-T based on Intel X550 Dedicated management port RJ45 Dedicated IPMI LAN port
Expansion Slots	1 x PCIe 3.0 x16/x16 full-height half-length (FHHL) slot from CPU#1 via riser card 1 x PCIe 3.0 x16/x16 full-height half-length (FHHL) slot from CPU#2 via riser card 1 PCIe 3.0 x4/x8 low-profile (LP) slot from chipset, via riser card
Disk Subsystem Controller	32 PCIe 3.0 ports for connecting NVMe drives (from CPU#1 and CPU#2) Integrated SATA controller, 4 ports 6Gb/s, RAID 0/1 (2 ports with built-in power for SATA DOM) Additionally, a RAID controller or HBA adapter from the configurator list
Disk Subsystem	Up to 32 front-panel hot-swappable NVMe EDSFF E1.S 5.9mm (Short) form factor drives. Instead of EDSFF drives, it is possible to install PCIe x4 M.2 2242/2260/2280/22110 drives. M.2 drives require appropriate sleds. Hot swapping is not supported for M.2 drives.
Additional Storage	Up to 2 SATA DOM (Disk-On-Module) drives.
Optical Storage	External only via USB port
Interfaces	DB-15 video connector, rear panel 2 x 10GbE RJ-45 network ports, rear panel Gbe RJ-45 management port, on the rear panel 4 USB 3.0 ports: 2 rear, 2 front 1 serial port internal
Video Adapter	Integrated ASPEED AST2500 BMC Graphics controller
Control Panel	Control buttons: Power On/Off, UID Indication: Power LED, HDD activity LED, 2x Network activity LEDs, System Overheat / Fan Fail LED, UID LED
Management and Monitoring	Intelligent Platform Management Interface v.2.0 (IPMI 2.0) Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC) Monitoring voltages, temperatures, fan speeds
Supported Operating Systems	Current list
Power Unit	2 x Redundant Hot-Swap Power Supplies 1600W 80 Plus Titanium Level
System Cooling	8 x 40mm fixed mount dual rotor system fans
Dimensions	Height 4.3 cm, width 43.8 cm, depth 76.2 cm
Weight	18.0 kg, in packaging 24 kg (platform only)
Power Supply Parameters	100-240 VAC, 10 A, 50-60 Hz
Operating Environment	Operating temperature from +10°C to +35°C Storage temperature from -40°C to +60°C Operating relative humidity from 8% to 90% Relative humidity during storage from 5% to 95%
Warranty	Standard 36 months warranty, service at the service center