Supermicro SSG-540P-E1CTR36H. Technical specifications

ENG | RUS

	Single-socket storage server based on 3rd Generation Intel Xeon Scalable Processor Typical application: - Enterprise level server - DBMS server - Specialized storage server
	Configurator Please check availability

Platform characteristics SSG-540P-E1CTR36H

Characteristic	Description

Platform	Supermicro SSG-540P-E1CTR36H Server Platform
Server Board	Super X12SPI-TF
Server Chassis	SuperChassis CSE-847BTS-R1K23LPBP4
Form Factor	4U, rack mountable
Processor	1 x 3rd Gen Intel Xeon Scalable processor with 270W max TDP Processor socket Socket-P4 (LGA 4189), Intel Ice Lake architecture (Gen3), 10 nm process technology ECC memory support, from 8 to 40 physical cores, operating frequency from 2.0 GHz to 3.6 GHz Up to 60 MB L3 cache per processor (1.5 MB per core), 1.25 MB L2 cache per core, 32 KB + 48 KB L1 cache per core Support for Intel Hyper-Threading technologies (2 threads per core), Intel Turbo Boost, AVX-512 (2 FMA) Interprocessor interface UPI 10.4 (2 links) or 11.2 GT/s (3 links),64 PCIe 4.0 lanes, DMI 3.0 (4 lines) DDR4-2667/2933/3200 MT/s memory support, up to 6 TB per CPU, 4 dual-channel memory controllers (IMC)
Chipset	Intel C621A Chipset, 20 PCIe 3.0 lanes, up to 14 SATA ports, 14 USB 2.0, 10 USB 3.0, management port
System Memory	Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM), 3DS RDIMM, 3DS LRDIMM Support for Intel Optane persistent memory 200 series (PMem) Memory operating frequency 2667/2933/3200 MT/s depending on processor model Maximum capacity: for DRAM - 2 TB (8 x 256 GB), for DRAM + PMem - 3 TB (4 x 256 GB + 4 x 512 GB) Four dual-channel memory controllers per processor (8 channels per CPU), 8 DIMM slots (8 per CPU, 1 module per channel) Memory subsystem bandwidth 171/188/205 GB/s (2667/2933/3200 MT/s) per CPU
Network Controller	Integrated Intel X550 network controller, 2 ports 10Gb Ethernet RJ-45 Dedicated management port RJ45 Dedicated IPMI LAN port
Expansion Slots	5 PCIe 3.0 slots for low-profile expansion cards: - 1 slot: PCIe 3.0 x8/x8 low-profile half-length (LPHL), occupied by SAS RAID LSI 3908 - 2 slot: PCIe 3.0 x8/x16 low-profile half-length (LPHL) - 3 slot: PCIe 3.0 x16/x16 low profile half length (LPHL) - 4 slot: PCIe 3.0 x16/x16 low profile half length (LPHL) - 5 slot: PCIe 3.0 x8/x8 low profile half length (LPHL)
Disk Subsystem Controller	Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 HD Mini-SAS connectors on motherboard Integrated Secondary SATA controller, 2 x 6Gb/s ports, RAID 0/1, 2 x 7-Pin SATA connectors 2 SATA connectors support SATA DOM installation with onboard power RAID controller LSI 3908, 8 internal SAS3 ports, 12Gb/s, 8GB Cache, RAID 0/1/10/5/6/50/60, PCIe 4.0 x8, LP, SLIMLINE x8 1 x M.2 2280/22110 PCIe 3.0 x4 or SATA SSD slot on motherboard (connected to chipset) x PCIe 3.0 x4 ports (SLIMLINE x8 connector on motherboard) for NVMe SSDs in rear panel cage (Boot RAID 0/1 via Intel VMD Key) Additionally RAID controllers or HBA adapters from the configurator list Options for installing additional M.2 drives: - Low-profile expansion card for 2 M.2 PCIe 3.0 x4 2260/2280/22110 drives (up to 2 cards), VMD support - Low-profile expansion card for 2 M.2 PCIe 3.0 x4 or SATA 2242/2280/22110 drives, BOOT RAID 0/1 support, based on Broadcom SAS3408
Disk Subsystem	Up to 36 hot-swappable 3.5" SATA3/SAS3 HDD/SSD drives (2.5" drives via adapters) connected to LSI 3908 SAS RAID: - A basket with a port expander for 24 SAS3/SATA3 12Gb/s disks on the front panel of the server - A cage with a port expander for 12 SAS3/SATA3/NVMe(4) 12Gb/s drives on the rear panel of the server (for NVMe drives, an AOC-SLG3-4E4R HBA is required) basket for 2 2.5" SAS/SATA 12Gb/s disks with hot swap on the rear panel of the server (optional), connection to the motherboard sSATA controller (RAID 0/1) or additional controller 2 x 2.5" NVMe PCIe 3.0 x4 hot-swappable drive cage on the rear panel of the server (optional), connected to the SLIMLINE x8 connector of the motherboard (RAID 0/1 via VMD Key) One or two internal cages for 2 x 2.5" drives or 1 x 3.5" SATA drive with fixed installation (optional), connection to motherboard SATA controller (RAID 0/1/10/5) or additional controller
Additional Storage	Up to two SATA DOM drives (optional), connect to motherboard sSATA controller (RAID 0/1) One M.2 2280/22110 PCIe 3.0 x4 or SATA (optional) drive, connected to chipset Up to 4 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installed in PCIe 3.0 x8 expansion cards (RAID 0/1/10/5 via VMD Key) Up to 2 x M.2 2280/22110 PCIe 3.0 x4 or SATA drives when installed in an expansion card with Boot RAID 0/1 support based on Broadcom SAS3408
Optical Storage	No
Interfaces	DB-15 video connector, rear panel 2 x 10 GbE RJ-45 network ports, rear panel RJ-45 management port, rear panel 5 USB 3.2 Gen1 ports: 2 rear, 2 internal, 1 Type A 4 USB 2.0 ports: 2 on the rear panel, 2 internal ports 1 internal serial port 2 HD Mini-SAS External 12Gb/s connectors (8 SAS ports) for connecting expansion disk shelves
Video Adapter	Integrated graphics controller based on ASPEED AST2600 BMC
Control Panel	Control buttons: Power, Reset LED indication: Power status, HDD activity, Network activity, System information, Power failure
Management and Monitoring	Intelligent Platform Management Interface v.2.0 (IPMI 2.0) Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC) Monitoring voltages, temperatures, fan speeds
Supported Operating Systems	Current list
Power Unit	x Redundant Hot-Swap Power Supplies 1200W 80 Plus Titanium, PMBus
System Cooling	7 x 8cm hot-swappable and redundant system fans
Dimensions	Height 17.8 cm (4U), width 43.7 cm, depth 69.9 cm
Weight	30 kg, 46 kg per pack
Power Supply Parameters	100-240 VAC, 8.5-7.0 A, 50-60 Hz
Operating Environment	Operating temperature from +10°C to +35°C Storage temperature from -40°C to +70°C Operating relative humidity from 8% to 90% Relative humidity during storage from 5% to 95%
Warranty	Standard 36 months warranty, service at the service center