| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-1019C-FHTN8 Server Platform |
| Server Board | Super X11SCM-LN8F |
| Server Chassis | SuperChassis CSE-513BTQC-350B |
| Form Factor | 1U, rack mount, depth 38cm,FRONT I/O |
| Processor | 1 Intel Xeon E-2100 or Xeon E-2200 Processor
Processor socket H4 (FCLGA-1151), Intel Coffee Lake architecture, 14nm process technology
Support for DDR4-2666 ECC-Unbuffered Memory (2 channels)
4, 6 or 8 physical cores, 8MB, 12MB or 16MB Smart Cache
Support for Intel Turbo Boost, Intel Hyper-Threading technologies (not all processor models)
Power consumption 71-80W (depending on the processor model)
Integrated graphics controller in the processor is not supported (for CPU models with integrated graphics) |
| Chipset | Intel C246 Chipset |
| System Memory | DDR4-2666 ECC Unbuffered (UDIMM), dual-channel memory controller
Maximum capacity 64GB/128GB (4 x 16GB/32GB UDIMM), 4 DIMM slots, 2 slots per channel
Supported memory modes 2666/2400/2133 MHz
Memory subsystem bandwidth 42.6 Gb/s |
| Network Controller | Integrated network controller, 8 ports 1Gb Ethernet RJ-45
based on Intel i210AT Gigabit Ethernet Controller
Dedicated RJ-45 management port
It is possible to install an additional network adapter in the PCIe 3.0 x16 FH/LP slot (see the corresponding field in the Configurator) |
| Expansion Slots | 1 x PCIe 3.0 x16/x16 full-height (FHHL) via riser card |
| Disk Subsystem Controller | Integrated SATA controller of the Intel C246 chipset, 6 ports 6Gb/s (RAID 0/1/5/10), SATA 7-Pin connectors
(2 SATA ports with built-in power for SATA DOM)
1 x M.2 SATA or PCIe 3.0 x4 (Chipset) 2280/22110
1 x M.2 PCIe 3.0 x4 (Chipset) 2280/22110
It is possible to install a RAID controller or HBA adapter in the PCIe 3.0 x16 FH/LP expansion slot (see the corresponding field in the Configurator) |
| Disk Subsystem | Up to 2 hot-swappable 2.5" SATA3/SAS3 HDD/SSD 12Gb/s
Drives with SAS interface require installation of SAS controller in expansion slot and additional cable (HD Mini-SAS -> 4 x SATA)
Additionally, up to 3 x 2.5" SATA SSD drives with fixed installation |
| Additional Storage | Up to two SATA DOM (Disk-On-Module) drives to SATA 7-Pin connectors on the motherboard
Up to two M.2 PCIe 3.0 x4 2280/22110 drives (connected to chipset) in slots on the motherboard
One M.2 SATA 2280/22110 drive (only instead of M.2 PCIe drive) |
| Optical Storage | No, only external via USB port |
| Interfaces | Connectors on the front panel of the server:
- DB-15 video connector
- 8 GbE RJ-45 network ports
- Dedicated RJ-45 management port
2 USB 2.0 ports
- 2 USB 3.1 ports
Power connector on the back. |
| Video Adapter | Integrated based on Aspeed AST2500 BMC
The integrated graphics core in the processor is not supported in this server model. |
| Control Panel | Control buttons: Power, Reset
Indication: Power LED, HDD activity LED, Network activity LED, System Information LED |
| Management and Monitoring | Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, Aspeed AST2500 BMC with 10/100/1000Mbps |
| Supported Operating Systems | Current list |
| Technologies And Standards | ACPI 6.0
SMBIOS 2.7
Plug and Play (PnP)
RTC (Real Time Clock) Wakeup
UEFI 2.7
USB Keyboard support
PCI 3.0 |
| Power Unit | 1 x Fixed Power Supply 350W 80 Plus Platinum |
| System Cooling | 4 x Fixed Mount 22.5K RPM System Fans
optional up to 2 x 40mm fixed mount fans for expansion card cooling |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 38.1 cm |
| Weight | 5 kg |
| Power Supply Parameters | 100-240 VAC, 2.6 A Max, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |