| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-1019P-WTR Server Platform |
| Server Board | Super MBD-X11SPW-TF |
| Server Chassis | SuperChassis 116AC2-R504WB |
| Form Factor | 1U, rack mountable |
| Processor | 1 Intel Xeon Scalable processor with a maximum TDP of 205W
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies
Interprocessor interface UPI 9.6-10.4GT/s (2 links), 48 PCIe 3.0 lanes, DMI 3.0
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC) |
| Chipset | Intel C622 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU)
Maximum capacity: for RDIMM - 192 GB, for LRDIMM - 768 GB
Six-channel memory controller, 6 DIMM slots, 1 slot per channel
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) |
| Network Controller | Integrated network controller, 2 ports 10Gb Ethernet 10GBase-T RJ-45
based on Intel X772 + X557 Dual port 10GbE LAN
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | x PCIe 3.0 x16/x16 full-height full-length (FHFL) slots via riser card
1 PCIe 3.0 x8/x8 low-profile slot via riser card |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 4 7-Pin SATA connectors, 1 Mini-SAS connector
Integrated Secondary SATA controller, 2 x 6Gb/s ports, RAID 0/1/10/5, 2 x 7-pin SATA connectors on motherboard
2 SATA connectors support SATA DOM installation with onboard power
1 x M.2 2242/2280 PCIe 3.0 x4 or SATA SSD slot on motherboard
1 USB 3.0 (Type A) on motherboard for eUSB storage
Additionally RAID controllers or HBA adapters from the configurator list |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SATA/SAS HDD/SSD drives in front panel cage, including up to 2 NVMe 2.5" drives |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives in SATA connectors on the motherboard, optional
x M.2 2242/2280 PCIe 3.0 x4 or SATA drive in M.2 slot on motherboard, optional
1 or 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card) |
| Optical Storage | External only via USB port |
| Interfaces | DB-15 video connector, rear panel
2 x 10GbE RJ-45 network ports, rear panel
Gbe RJ-45 management port, on the rear panel
7 USB 2.0 ports: 2 rear, 5 internal
5 USB 3.0 ports: 2 rear, 1 internal Type A, 2 front
1 serial port on rear panel, 1 port - internal |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2x Network activity LEDs, System Overheat LED, Information LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 500W Platinum Hot-Swap Redundant Power Supplies |
| System Cooling | x 40mm fixed mount dual rotor system fans
Additional 40mm fixed mount system fan for cooling PCIe expansion cards |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 60 cm |
| Weight | 7 kg, in packaging 12 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 6.1-2.6 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |