| Characteristic |
Description |
 | | | Platform | Supermicro SYS-1029U-E1CR4 Server Platform |
| Server Board | Super X11DPU |
| Server Chassis | SuperChassis CSE-119UTS-R751-T |
| Form Factor | 1U, rack mountable |
| Processor | Intel Xeon Scalable processors with a maximum TDP of 205W
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies
Interprocessor interface UPI 9.6-10.4GT/s (2 links), 48 PCIe 3.0 lanes, DMI 3.0
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB(with index "M")/4.5TB(with index "L") per CPU, six-channel memory controller (IMC) |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU)
3DS Modules Support
Maximum capacity: for RDIMM - 768 GB, for LRDIMM - 1536 GB or 3072 GB (for processors with index "M")
Six-channel memory controller, 24 DIMM slots (12 per CPU)
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) per processor
Intel® Optane™ DCPMM Support |
| Network Controller | Integrated network controller, 4 ports 1Gb Ethernet RJ-45 1000BASE-T based on Intel® i350AM4
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | 1 x16/x16 PCIe 3.0 full-height full-length (FHFL) slot from CPU#2 via riser card
1 x16/x16 PCIe 3.0 full-height full-length (FHFL) slot from CPU#2 via riser card
1 PCIe 3.0 x8/x16 low profile (LP) slot from CPU#2, via riser card
1 PCIe 3.0 x8/x8 low profile (LP) slot from CPU#1, internal, via riser card |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on motherboard (not used with expander)
Integrated Secondary SATA controller, 6 ports 6Gb/s, RAID 0/1/10.5, 1 Mini-SAS connector, 2 7-Pin SATA connectors (not used with expander)
2 SATA connectors support SATA DOM installation with onboard power
2 x M.2 2260/2280/22110 PCIe 3.0 x4 SSD slots on expansion card (optional)
1 x M.2 2242/2260/2280/22110 SATA SSD slot and 1 x M.2 2242/2260/2280/22110 PCIe 3.0 x4 slot via optional riser card
It is necessary to install a SAS RAID controller or HBA adapter from the configurator list to connect a disk cage with an expander
4 OCuLink PCIe 3.0 x4 ports for connecting NVMe drives (2 from CPU#1, 2 from CPU#2), not used in this server model |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SATA3/SAS3 HDD/SSD drives in front panel cage
To connect drives, you need to install a SAS RAID controller or SAS HBA from the configurator list
Connectors on the disk cage:
- for 10 SAS3/SATA3 drives: 2 Mini-SAS HD connectors, cage with expander (port expander) |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives, optional
M.2 storage devices (optional):
- 1 x M.2 2242/2260/2280/22110 drive with PCIe 3.0 x4 interface
- 1 x M.2 2242/2260/2280/22110 drive with SATA interface
- 2 x M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface
HHHL SSDs in expansion slots (optional) |
| Optical Storage | External only via USB port |
| Interfaces | 2 DB-15 video connectors, rear panel and internal on system board
4 x 1GbE RJ-45 network ports, rear panel
1GbE RJ-45 management port, rear panel
5 USB 3.0 ports: 2 rear, 2 front, 1 Type A internal
x DB-9 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller
Compatible graphics adapters (maximum one per server):
- PNY Nvidia Quadro P5000, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Quadro P6000, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended |
| Computing Modules | Compatible GPU-based compute modules (maximum one per server):
PNY Nvidia Tesla V100 GPU, limitations: CPU up to 165W, ambient temperature not higher than 25°C, SSD recommended
- PNY Nvidia Tesla M60 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla M10 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla P100 GPU, limitations: CPU up to 165W, ambient temperature not higher than 25°C, SSD recommended
PNY Nvidia Tesla P40 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla P4 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, Network activity LEDs, System Overheat LED, Fan fail LED, UID LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 750W 80 Plus Platinum Hot-Swap Redundant Power Supplies |
| System Cooling | 8 x 40mm fixed mount dual rotor system fans |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 72.4 cm |
| Weight | 12.0 kg, in packaging 19 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 4.2-1.8 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |
|