| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-1029UZ-TN20R25M Server Platform |
| Server Board | Super X11DPU-ZE+ |
| Server Chassis | SuperChassis CSE-116UTQ20-R1K62-T |
| Form Factor | 1U, rack mountable |
| Processor | Intel Xeon Scalable processors with a maximum TDP of 205W
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies
Interprocessor interface UPI 9.6-10.4GT/s (2 links), 48 PCIe 3.0 lanes, DMI 3.0
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB(with index "M")/4.5TB(with index "L") per CPU, six-channel memory controller (IMC) |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU)
3DS Modules Support
Maximum capacity: for RDIMM - 768 GB, for LRDIMM - 1536 GB or 3072 GB (for processors with index "M")
Six-channel memory controller, 24 DIMM slots (12 per CPU)
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) per processor
Intel® Optane™ DCPMM Support |
| Network Controller | Integrated network controller, 2 ports 25Gb Ethernet SFP28
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | x PCIe 3.0 x8/x8 full height 10.5" long from CPU#2 via riser card
1 x PCIe 3.0 x8/x8 full-height 10.5" long slot from CPU#2 via riser card, occupied by AOC-SLG3-2E4R HBA with 2 x PCIe 3.0 x4 NVMe ports (only in 20-drive NVMe configuration)
1 PCIe 3.0 x8/x8 low-profile (LP) slot from CPU#2, via riser card, occupied by AOC-SLG3-2E4R HBA adapter with 2 PCIe 3.0 x4 NVMe ports
(4-port OCuLink PCIe 3.0 x4 NVMe riser card from CPU#2)
1 PCIe 3.0 x16/x16 low-profile (LP) slot from CPU#1, internal, via riser card, occupied by AOC-SLG3-4E4R HBA adapter with 4 PCIe 3.0 x4 NVMe ports
(4-port OCuLink PCIe 3.0 x4 NVMe riser card from CPU#1) |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on the motherboard
can be used to connect 2 SATA drives in the front panel cage and 2 SATA drives in an additional cage installed in the expansion slot
Integrated Secondary SATA controller, 2 x 6Gb/s ports, RAID 0/1, 2 x 7-Pin SATA connectors
- can be used to connect 2 SATA drives in a front panel cage OR 2 SATA drives in an additional cage installed in an expansion slot
- 2 SATA connectors support installation of SATA DOM with built-in power
OCuLink PCIe 3.0 x4 ports for connecting NVMe drives on the motherboard: 2 from CPU#1, 2 from CPU#2
4 x OCuLink PCIe 3.0 x4 ports for connecting NVMe drives on riser card: 4 from CPU#1
4 x OCuLink PCIe 3.0 x4 ports for connecting NVMe drives on riser card: 4 from CPU#2
4 HD Mini-SAS PCIe 3.0 x4 ports for connecting NVMe drives via AOC-SLG3-4E4R HBA adapter (in slot from CPU#1)
2 x HD Mini-SAS PCIe 3.0 x4 ports for connecting NVMe drives via AOC-SLG3-2E4R HBA adapter (in slot from CPU#2)
x HD Mini-SAS PCIe 3.0 x4 ports for connecting NVMe drives via AOC-SLG3-2E4R HBA adapter (in slot from CPU#2), for a configuration with 20 NVMe drives
Additionally, a RAID controller or HBA adapter from the configurator list |
| Disk Subsystem | Up to 20 hot-swappable 2.5" PCIe 3.0 x4 NVMe SSDsheight up to 7mm(!) in the front panel basket (connected to NVMe ports)
Including up to 2 2.5" SAS3/SATA3 SSD drivesheight up to 7mm(!), with connection to motherboard or SAS controller (additional cable required)
To connect drives with a SAS interface, you need to install a SAS controller
Connectors on the disk cage:
- for 2 SAS3/SATA3 drives 2 7-Pins SATA connectors
- for 20 NVMe drives 20 OCuLink connectors |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives, optional
Up to 2 x M.2 2280/22110 PCIe 3.0 x4 via expansion card, optional
Up to 2 SATA3 2.5" SSD drives via expansion card, optional
HHHL SSD in expansion slot (optional) |
| Optical Storage | External only via USB port |
| Interfaces | 2 DB-15 video connectors, rear panel and internal on system board
2 x 25GbE ЫАЗ28 network ports, on the rear panel
1GbE RJ-45 management port, rear panel
3 USB 3.0 ports: 2 rear, 1 Type A internal
2 USB 2.0 ports on the front panel
x DB-9 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System UID
Indication: Power LED, HDD activity LED, Network activity LEDs, UID LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1600W 80 Plus Titanium Redundant Hot-Swap Power Supplies |
| System Cooling | 8 x 40mm fixed mount dual rotor system fans |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 70.6 cm |
| Weight | 15.0 kg, in packaging 21 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 10-8 A Max, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |