| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-111E-WR Server Platform |
| Server Board | Super X13SEW-F |
| Server Chassis | SuperChassis CSE-116BTS-R000WNP |
| Form Factor | 1U, rack mountable |
| Processor | 1 processor from the 5th/4th Generation Intel® Xeon® Scalable Processors family
Maximum Thermal Design Power (TDP) -300Won the processor
Supported processors: Intel Xeon Bronze 3400/3500, Silver 4400/4500, Gold 5400/5500, Gold 6400/6500, Platinum 8400 (except processors with index Q)
FCLGA4677 processor socket, Intel Sapphire Rapids/Emerald Rapids architecture, Intel 7 process technology
From 8 to 64 cores and 128 threads per processor, operating frequency from 1.8 GHz to 3.7 GHz
Up to 128 logical CPUs per server with Intel Hyper-Threading Technology
Up to 320 MB L3 cache per processor
Maximum amount of RAM supported by the processor4TB
DDR5-4000/4400/4800/5600 MT/s memory support (depending on processor model), eight-channel memory controller (IMC)
Support for Registered ECC memory, including 3DS
Support for Intel® Optane™ DC Persistent Memory 300 Series (Crow Pass) |
| Chipset | Intel C741 Chipset, 20 PCIe 3.0 lanes, 24 SATA ports, 14 USB 2.0 / 10 USB 3.0 |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 512 GB (8 x 64 GB)
- for RDIMM 3DS - 2048 GB (8 x 256 GB)
Memory modes: 4800/5600 MT/s (1 DPC)
Integrated 8-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU
Memory subsystem bandwidth 307.2 / 358.4 GB/s |
| Network Controller | Integrated network controller, 2 ports 1Gb Ethernet 1000Base-T RJ-45 based on Intel i210 Dual port 1GbE LAN
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to three network adapters in standard PCIe 5.0 x16 FHHL expansion slots |
| Expansion Slots | Riser Card #1:
- 2 x PCIe 5.0 x16/x16 Full Height, Full Length slots, connection toCPU
Riser Card #2:
- 1 PCIe 5.0 x8/x16 Low Profile slot, connection toCPU |
| Disk Subsystem Controller | Integrated chipset SATA controller, 8 ports 6Gb/s (1 8-port SFF-8654 SLIMLINE x8 connector):
- support VROC 8.0 RAID 0/1/10/5
Integrated chipset tSATA controller, 2 x 6Gb/s ports (2 x 7-Pin SATA connectors with SATA DOM support):
- VROC 8.0 RAID 0/1 support
10 PCIe 5.0 x4 ports for connecting NVMe drives (5 SFF-TA-1016 MCIO x8 connectors from CPU):
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (RAID requires Intel VROC Key)
1 x M.2 2280/22110 PCIe 3.0 x2 storage slot from C641 chipset:
- support Intel VMD, Intel VROC 8.0
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe 5.0 expansion slots.
- Tri-Mode controllers or HBA adapters for NVMe drives in PCIe 5.0 expansion slots. |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SAS3/SATA3/NVMe Gen5 U.2/U.3 HDD/SSD drives in the front panel cage of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for SAS3/SATA drives;
- 5 MCIO x8 slots for NVMe drivesPCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated Primary SATA controller of the motherboard with the cable SLIMLINE x8 -> 2 x SLIMLINE x4 (connected by default for eight drives, bays 1-8).
- to the integrated Tertiary SATA controller of the motherboard with a 2 x 7-Pin SATA -> SLIMLINE x4 Cross-Over cable (connected by default for two drives, bays 9-10).
For SATA and/or SAS drives:
- to a SAS RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (an additional cable is required for every four drives);
- to the Tri-Mode controller using cables HD Mini-SAS -> SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 10 drives, additional cables required).
For NVMe drives:
- to 10 PCIe 5.0 x4 ports from the CPU on the motherboard with additional MCIO x8 -> MCIO x8 cables.
to Tri-Mode controllers with SLIMLINE x8 -> MCIO x8 cables (up to 8 drives, an additional cable is required for each pair of drives).
to HBA adapters (4 PCIe 4.0 x4 ports) with SLIMLINE x8 -> MCIO x8 cables (up to 8 drives, an additional cable is required for each pair of drives). |
| Additional Storage | x M.2 2280/22110 PCIe 3.0 x2 drive into the slot on the motherboard.
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot.
Up to 2 SATA DOM (Disk-On-Module) drives to SATA connectors of the tSATA controller on the motherboard (Boot RAID 0/1). |
| Optical Storage | Not supported, only external via USB port |
| Interfaces | Front panel: 2 USB 3.2 Gen1 ports
On the rear panel: 2 x 1GbE RJ-45 network ports (Intel i210), VGA DB-15 video connector, RJ-45 1GbE management port, 2 x USB 3.2 Gen1 ports, 2 x USB 2.0 ports, COM port |
| Video Adapter | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
It is possible to install two additional single-width video cards |
| Control Panel | On the front panel:
- control buttons: Power, System ID
- indication: Power LED, ID LED, Information LED, Drive activity LED, LAN Activity LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds, case intrusion sensor |
| Supported Operating Systems | Current list |
| Power Unit | x 860W Titanium Hot-Swap Redundant Power Supplies |
| System Cooling | 5 x 40mm Dual Rotor Fixed Mount System Fans 23.3K-20.3K RPM
1 fan in each power supply
CPU radiator with passive cooling
Additional: 1 x 40mm dual-rotor system fan with fixed installation for cooling PCIe expansion cards |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 59.7 cm |
| Weight | 10 kg, in a package 15 kg (only platform) |
| Power Supply Parameters | 100-240 VAC, 10-4 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Operating relative humidity from 8% to 80%
Relative humidity during storage from 8% to 90% |
| Warranty | Standard 36 months warranty, service at the service center |