| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-112B-WR Server Platform |
| Server Board | Super X14SBW-F
One Intel® Xeon® 6 processor (6700E), maximum TDP 350W
8 slots for installing DDR5-6400 RDIMM RAM modules
PCIe 5.0 x2 slots for M.2 2280/22110 drives, 4 USB 3.2 Gen1 ports, 2 1GbE network ports, 2 COM ports, VGA port
2 PCIe 5.0 x32 and x8 slots for installing riser cards
8 PCIe 5.0 x4 ports for connecting NVMe drives (4 MCIO x8 connectors)
1 SLIMLINE x8 connector from SATA controller based on ASM1164 (AHCI Mode)
Total 88 PCIe 5.0 lanes
Baseboard Management Controller Aspeed AST2600, IPMI |
| Server Chassis | SuperChassis CSE-116BTS-R000WNP |
| Form Factor | 1U, rack mountable |
| Processor | 1 Intel® Xeon® 6 Processor family (6700E CPU with E-Cores)
Maximum Thermal Design Power (TDP) -300Won the processor
Supported Processors: Intel Xeon 6 Processors with E-Cores (6700E Series)
Processor socket FCLGA4710 (E2), Intel Sierra Forest architecture, Intel process technology 3
From 64 to 144 cores/144 threads per processor, operating frequency from 1.8 GHz to 2.4 GHz
Up to 144 logical CPUs per server
Up to 108 MB L3 cache per processor
Maximum amount of RAM supported by the processor4 TB
Supports DDR5-6400 RDIMM memory
8-channel memory controller (IMC) |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
DDR5 ECC Registered Memory (RDIMM) 1.1V
Supported module types: 32GB, 64GB, 96GB, 128GB
(32GB modules can only be installed one per channel)
Maximum server RAM (processor supports maximum 4 TB of RAM):
- for RDIMM - 2048 GB (8 x 256 GB)
Memory operating modes: maximum 6400 MT/s (1 DPC), depends on the processor model
Integrated 8-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU, 8 memory modules per server
Memory subsystem bandwidth 410 (1 DPC) GB/s |
| Network Controller | Integrated network controller, 2 ports 1Gb Ethernet 1000Base-T RJ-45 based on Intel i210 Dual port 1GbE LAN
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to three network adapters in standard PCIe 5.0 x16/x8 FHHL expansion slots |
| Expansion Slots | Riser Card #1:
- 2 x PCIe 5.0 x16/x16 Full Height, Full Length slots, connection toCPU
Riser Card #2:
- 1 PCIe 5.0 x8/x16 Low Profile slot, connection toCPU |
| Disk Subsystem Controller | Integrated SATA controller based on ASM1164, 8 ports 6Gb/s (1 connector 8-port SFF-8654 SLIMLINE x8), AHCI Mode
8 PCIe 5.0 x4 ports for connecting NVMe drives (4 SFF-TA-1016 MCIO x8 connectors)
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (for RAID 1/10/5, an Intel VROC Key activation key is required)
2 x M.2 2280/22110 PCIe 5.0 x2 storage slots from CPU
- support for Intel VMD, Intel VROC 8.0 RAID 0/1 (RAID 1 requires Intel VROC Key)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe 5.0 expansion slots.
- Tri-Mode controller for NVMe drives in PCIe 5.0 expansion slots (alternative connection option) |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SAS3/SATA3/ drivesNVMe Gen5 U.2/U.3 HDD/SSD into the basket on the front panel of the server.
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for SAS3/SATA drives;
- 5 MCIO x8 slots for NVMe drivesPCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA drives:
to the integrated SATA controller based on ASM1164 (AHCI Mode) with the SLIMLINE x8 -> 2 x SLIMLINE x4 cable (connected by default for eight drives, bays 1-8).
For SATA and/or SAS drives:
- to a SAS RAID controller or HBA using HD Mini-SAS -> SLIMLINE x4 cables (an additional cable is required for every four drives);
- to the Tri-Mode controller using cables HD Mini-SAS -> SLIMLINE x4 or SLIMLINE x8 -> 2 x SLIMLINE x4 (depending on the controller model, up to 10 drives, additional cables required).
For NVMe drives:
- to 8 PCIe 5.0 x4 ports from the CPU on the motherboard (4 MCIO x8 connectors) with MCIO x8 -> MCIO x8 cables (up to 8 drives, an additional cable is required for every two drives);
- to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 4 drives per controller, each pair of drives requires an additional cable, alternative connection option); |
| Additional Storage | 2 x M.2 2280/22110 PCIe 5.0 x2 drives in motherboard slots
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB port |
| Interfaces | Front panel: 2 USB 3.2 Gen1 ports
On the rear panel: 2 x 1GbE RJ-45 network ports (Intel i210), VGA DB-15 video connector, RJ-45 1GbE management port, 2 x USB 3.2 Gen1 ports, COM port |
| Video Adapter | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
Possibility to install two additional video cards or single-width GPUs |
| Control Panel | On the front panel:
- control buttons: Power, System ID
- indication: Power Status LED, Fan Failed / System Over Heat LED, Drive activity LED, LAN Activity LEDs |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds, case intrusion sensor |
| Supported Operating Systems | Current list |
| Power Unit | x 860W Titanium Hot-Swap Redundant Power Supplies |
| System Cooling | x 40mm dual-rotor hot-swappable redundant system fans 23.3K-20.3K RPM
1 fan in each power supply
CPU radiator with passive cooling
Additional: 1 x 40mm dual-rotor system fan with fixed installation for cooling PCIe expansion cards |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 59.7 cm |
| Weight | 9.5 kg, in packaging 15.2 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 10-4 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Operating relative humidity from 8% to 80%
Relative humidity during storage from 8% to 90% |
| Warranty | Standard 36 months warranty, service at the service center |