| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-121C-TN10R Server Platform |
| Server Board | Super X13DDW-A |
| Server Chassis | SuperChassis CSE-LB16TS-R0AWNP3 |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 5th/4th Generation Intel® Xeon® Scalable Processors
Maximum Thermal Design Power (TDP) -270W on the processor
Supported processors: Intel Xeon Silver 4400/4500, Gold 5400/5500, Gold 6400/6500, Platinum 8400/8500 (except processors with index Q)
FCLGA4677 processor socket, Intel Sapphire Rapids/Emerald Rapids architecture, Intel 7 process technology
From 8 to 64 cores and 128 threads per processor, operating frequency from 1.8 GHz to 3.7 GHz
Up to 256 logical CPUs per server with Intel Hyper-Threading Technology
Up to 320 MB L3 cache per processor
Maximum amount of RAM supported by the processor4TB
DDR5-4000/4400/4800/5600 MT/s memory support (depending on processor model), eight-channel memory controller (IMC)
Support for Registered ECC memory, including 3DS
Support for Intel® Optane™ DC Persistent Memory 300 Series (Crow Pass)
UPI 16 GT/s interprocessor interface (3 or 4 links),80 PCIe 5.0 lanes (8GB/s per lane), DMI 3.0 (4 lines) |
| Chipset | Intel C741 Chipset, 20 PCIe 3.0 lanes, 24 SATA ports, 14 USB 2.0 / 10 USB 3.0 |
| System Memory | Memory types:
- DDR5 ECC Registered Memory (RDIMM) 1.1V, DDR5 ECC Registered Memory 3DS (RDIMM 3DS) 1.1V
Maximum RAM (the processor supports a maximum of 4TB of RAM):
- for RDIMM - 1024 GB (16 x 64 GB)
for RDIMM 3DS - 4096 GB (16 x 256 GB)
Memory modes: 4800/5600 MT/s (1 DPC)
Integrated 8-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one memory module per channel (1 DPC)
Total 8 memory modules per CPU, 16 memory modules per server
Memory subsystem bandwidth 307.2 / 358.4 GB/s |
| Network Controller | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network modules of the OCP 3.0 standard
- up to two network adapters in standard PCIe 5.0 expansion slots |
| Expansion Slots | 1 x PCIe 5.0 x16/x16 full-height half-length (FHHL) slot from CPU#1 via riser card
1 x PCIe 5.0 x16/x16 full-height half-length (FHHL) slot from CPU#2 via riser card
1 x PCIe 5.0 x16/x16 OCP 3.0 slot for AIOM network module from CPU#1
1 PCIe 5.0 x16/x16 OCP 3.0 slot for AIOM network module from CPU#2 |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, SLIMLINE x8 connectorLow Profile on the motherboard
Integrated Secondary sSATA controller, 4 ports 6Gb/s, RAID 0/1/10/5, SLIMLINE x4 connectorLow Profileon the motherboard
2 x M.2 storage slotsPCIe 5.0 x4 , form factor 2280, connection to CPU#1, RAID 0/1 (for RAID 1 a VMD key is required)
8 portsPCIe 5.0 x4 for connecting NVMe drives (4 SFF-TA-1016 MCIO x4 connectors from CPU1, 4 SFF-TA-1016 MCIO x4 connectors from CPU2):
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (for RAID 1/10/5, an Intel VROC Key activation key is required)
8 portsPCIe 5.0 x4 for connecting NVMe drives (2 SFF-TA-1016 MCIO x8 connectors from CPU1, 2 SFF-TA-1016 MCIO x8 connectors from CPU2):
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (for RAID 1/10/5, an Intel VROC Key activation key is required)
Options for installing additional M.2 drives:
- Expansion card for 2 drives M.2 PCIe 3.0 x4 2260/2280/22110, VMD support
- Expansion card for 4 drives M.2 PCIe 3.0 x4 2242/2260/2280/22110, VMD support
- Expansion card for 2 M.2 PCIe 4.0 x4 or SATA 2242/2280/22110 drives, RAID 0/1 support, based on Broadcom SAS3808
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe 5.0 expansion slots
- Tri-Mode controller or HBA for NVMe drives in PCIe 5.0 expansion slots |
| Disk Subsystem | Up to 10 hot-swappable 2.5" SATA3/SAS4/NVMe Gen5 HDD/SSD drives in a cage on the front of the server
Connectors on the basket for connecting cables:
- 3 SLIMLINE x4 connectors for SAS4/SATA3 drives;
- 5 MCIO x8 slots for NVMe drivesPCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA drives:
- to the integrated Primary SATA controller of the motherboard with a SLIMLINE x8 cableLP -> 2 x SLIMLINE x4 (additional cable required, bays 1-8)
- to the integrated Secondary sSATA controller of the motherboard with a SLIMLINE x4 cableLP -> SLIMLINE x4 (additional cable required, bays 9-12)
For SATA and/or SAS drives:
to Tri-Mode controller or HBA with SLIMLINE x8 -> 2 x SLIMLINE x4 cables (up to 12 drives, additional cables required).
For NVMe drives:
- to 8 PCIe 5.0 x4 ports from CPU1 and CPU2 on the motherboard with additional cables 2 x MCIO x4 -> MCIO x8 (an additional cable is required for each pair of drives);
- to 4 PCIe 5.0 x4 ports from CPU1 or CPU2 on the motherboard with additional MCIO x8 -> MCIO x8 cables (an additional cable is required for each pair of drives);
- to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 8 drives, an additional cable is required for each pair of drives). |
| Additional Storage | Up to 2 M.2 2280 drivesPCIe 5.0 x4into the connectors on the motherboard (connection to CPU#1).
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | No, only external via USB port |
| Interfaces | DB-15 video connector on the rear panel
1GbE RJ-45 management port on rear panel
2 USB 3.0 ports on the rear panel
1 serial port on rear panel
2 USB 2.0 ports on the front panel |
| Video Adapter | Integrated ASPEED AST2600 BMC Graphics controller
One or two Nvidia graphics adapters from the compatibility list (see configurator) |
| Computing Modules | One or two PNY Nvidia Tesla GPUs from the compatibility list (see configurator) |
| Control Panel | Control buttons: Power On/Off, UID
Indication: Power Status LED, HDD activity LED, Network activity LEDs, System information LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds, case intrusion sensor |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 860W 80 Plus Titanium Redundant Hot-Swap Power Supplies |
| System Cooling | 6 x 40mm hot-swappable redundant dual-rotor system fans, 23.3K-20.3K RPM |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 59.7 cm |
| Weight | 11.3 kg, in packaging 18.1 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 4.2-1.8 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |