| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-122C-TN Server Platform |
| Server Board | Super X14DBHM
One or two Intel® Xeon® 6 (6700E) processors, maximum TDP 270W
Interprocessor interface 24 GT/s (4 lines)
32 slots for installing DDR5-6400 RDIMM RAM modules
2 x PCIe 5.0 x2 for M.2 2280/22110 drives, CPU#1 connection, 3 x USB 3.2 Gen1 ports
3 PCIe 5.0 x16 slots for installing riser cards, 2 PCIe 5.0 x16 slots for OCP 3.0 modules
16 PCIe 5.0 x4 ports for connecting NVMe drives (8 MCIO x8 connectors)
Total 176 PCIe 5.0 lanes
Baseboard Management Controller Aspeed AST2600, IPMI |
| Server Chassis | SuperChassis CSE-DC101TS-R000NP |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 Intel® Xeon® 6 Processors (6700E CPU with E-Cores)
Maximum Thermal Design Power (TDP) -270W on the processor
Supported Processors: Intel Xeon 6 Processors with E-Cores (6700E Series)
Processor socket FCLGA4710 (E2), Intel Sierra Forest architecture, Intel process technology 3
From 64 to 144 cores/144 threads per processor, operating frequency from 1.8 GHz to 2.4 GHz
Up to 288 logical CPUs per server
Up to 108 MB L3 cache per processor
Maximum amount of RAM supported by the processor4 TB
Supports DDR5-6400 RDIMM memory
8-channel memory controller (IMC)
Interprocessor interface UPI 16/20/24 GT/s (4 links),88 PCIe 5.0 lanes per processor (8 GB/s per lane) |
| Chipset | System on Chip (SoC) (the chipset is built into the processor) |
| System Memory | Memory types:
DDR5 ECC Registered Memory (RDIMM) 1.1V
Supported module types: 32GB, 64GB, 96GB, 128GB
(32GB modules can only be installed one per channel)
Maximum server RAM (processor supports maximum 4 TB of RAM):
- for RDIMM - 4096 GB (32 x 128 GB)
Memory operating modes: maximum 6400 MT/s (1 DPC) / 5200 MT/s (2 DPC), depends on the processor model
Integrated 8-channel memory controller (IMC) on the processor
Total 8 channels per CPU, one or two memory modules per channel (1 DPC/2 DPC)
Total 16 memory modules per CPU, 32 memory modules per server
Memory subsystem bandwidth 410 (1 DPC) / 333 (2 DPC) GB/s |
| Network Controller | Without integrated network controller
Dedicated 1 Gb Ethernet RJ-45 management port
Additionally:
- up to two network modules installed in a slot on the OCP 3.0 PCIe 5.0 x16 motherboard;
up to three network adapters in low-profile PCIe 5.0 x16 expansion slots |
| Expansion Slots | Riser Card #1:
- 1 x PCIe 5.0 x16/x16 Low Profile half-length slot, connected to CPU#1
Riser Card #2:
- 1 x PCIe 5.0 x16/x16 Low Profile half-length slot, connected to CPU#2
Riser Card #3:
- 1 x PCIe 5.0 x8/x16 Low Profile half-length slot, connected to CPU#2
PCIe 5.0 x16 OCP 3.0 slot on motherboard, connected to CPU#1
PCIe 5.0 x16 OCP 3.0 slot on motherboard, connected to CPU#2 |
| Disk Subsystem Controller | Without an integrated SATA controller, an additional RAID controller or HBA is required to connect drives with a SAS/SATA interface
16 PCIe 5.0 x4 ports for connecting NVMe drives (8 SFF-TA-1016 MCIO x8 connectors)
- support for Intel VMD, Intel VROC 8.0 RAID 0/1/10/5 (for RAID 1/10/5, an Intel VROC Key activation key is required)
2 x M.2 2280/22110 PCIe 5.0 x2 storage slots from CPU#1
- support for Intel VMD, Intel VROC 8.0 RAID 0/1 (RAID 1 requires Intel VROC Key)
Additionally (selection in the Configurator fields "Disk subsystem controller" and "HBA adapter):
- RAID controller, HBA adapter or Tri-Mode controller for SAS3 and/or SATA drives in PCIe 5.0 expansion slots.
- Tri-Mode controller for NVMe drives in PCIe 5.0 expansion slots (alternative connection option) |
| Disk Subsystem | Up to 8 hot-swappable 2.5" SAS3/SATA3/ drivesNVMe Gen5 U.2/U.3 HDD/SSD into the basket on the front panel of the server.
Connectors on the basket for connecting cables:
- 2 SLIMLINE x4 connectorsLow Profile (LP) for SAS3/SATA drives;
- 4 MCIO x8 slots for NVMe drivesPCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with SLIMLINE x8 -> 2 x SLIMLINE x4 cableLP (up to 8 drives, additional cable required);
- to Tri-Mode controller with cable SLIMLINE x8 -> 2 x SLIMLINE x4LP(up to 8 drives, additional cable required).
For NVMe drives:
- to 8 PCIe 5.0 x4 ports from the CPU on the motherboard (4 MCIO x8 connectors) with MCIO x8 -> MCIO x8 cables (up to 8 drives, an additional cable is required for every two drives);
- to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 4 drives per controller, each pair of drives requires an additional cable, alternative connection option);
Up to 4 hot-swappable 2.5" SAS3/SATA3/ drivesNVMe Gen5 U.2/U.3 HDD/SSD inadditional basket on the front panel of the server.
(This basket and drive sleds (4 pcs.) must be added to the server configuration.)
Connectors on the basket for connecting cables:
- 1 x SLIMLINE connector x4Low Profile (LP) for SAS3/SATA drives;
- 2 MCIO x8 slots for NVMe drivesPCIe 5.0 x4 (U.2 or U.3)
Storage device connection options:
For SATA and/or SAS drives:
- to SAS RAID controller or HBA with SLIMLINE x8 -> 2 x SLIMLINE x4 cableLP (up to 4 drives, additional cable required);
- to Tri-Mode controller with cable SLIMLINE x8 -> 2 x SLIMLINE x4LP (up to 4 drives, additional cable required).
For NVMe drives:
- to 4 PCIe 5.0 x4 ports from the CPU on the motherboard (2 MCIO x8 connectors) with two MCIO x8 -> MCIO x8 cables (up to 4 drives, additional cables required);
to the Tri-Mode controller using SLIMLINE x8 -> MCIO x8 cables (up to 4 drives, each pair of drives requires an additional cable, alternative connection option). |
| Additional Storage | 2 x M.2 2280/22110 PCIe 5.0 x2 drives into slots on the server motherboard
Up to two or four M.2 PCIe 3.0 x4 2280/22110 drives installed on an expansion card in a PCIe slot.
Up to two M.2 SATA / PCIe 4.0 x4 2280/22110 drives installed on a SAS3808-based expansion card with RAID 0/1 support in a PCIe slot. |
| Optical Storage | Not supported, only external via USB port |
| Interfaces | On the front panel: no
On the rear panel: Display Port, RJ-45 1GbE management port, 2 USB ports |
| Video Adapter | Integrated video controller Aspeed® AST2600 Video Graphic Adapter, 1920x1200@60Hz 32bpp, DDR4 SDRAM
Additional video card or double-width GPU can be installed |
| Control Panel | On the front panel:
- control buttons: Power, System ID
- indication: Power Status LED, Power Failed LED, System Information LED, Drive activity LED, LAN Activity LEDs |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2600 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds, case intrusion sensor |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 1000W Titanium Hot-Swap Redundant Power Supplies |
| System Cooling | 8 x 40mm dual-rotor system fans with redundancy and hot swappability
1 fan in each power supply
CPU radiator with passive cooling |
| Dimensions | Height 4.3 cm, width 43.8 cm, depth 75.5 cm |
| Weight | 17.0 kg, in packaging 21.3 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 10-4 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -30°C to +60°C
Operating relative humidity from 8% to 80%
Relative humidity during storage from 8% to 90% |
| Warranty | Standard 36 months warranty, service at the service center |