| Characteristic |
Description |
 | | | Platform | Supermicro SYS-2029U-TR4T Server Platform |
| Server Board | Super X11DPU |
| Server Chassis | SuperChassis CSE-219U2AC4-R1K02-T |
| Form Factor | 2U, rack mountable |
| Processor | Intel Xeon Scalable processors with a maximum TDP of 205W
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 technologies (1 or 2 FMA depending on the processor model)
Interprocessor interface UPI 9.6-10.4GT/s (the platform supports 2 links), 48 PCIe 3.0 lanes, DMI 3.0 (per processor)
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC) |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU model)
Support for 3DS memory modules
Maximum capacity per server: for RDIMM - 768 GB, for LRDIMM - 1536 GB or 3072 GB (for processors with index "M")
Six-channel memory controller, 24 DIMM slots (12 per CPU)
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) per processor |
| Network Controller | Integrated network controller, 4 ports 10Gb Ethernet RJ-45 10GBASE-T based on Intel® XL710-BM1 + X557-AT4
(network module is combined with riser card CPU#1)
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | Expansion slots from CPU#1 via riser card:
1) 2 x PCIe 3.0 x16/x16 full-height, full-length, double-wide (FHFL DW) slots;
Expansion slots from CPU#2 via two riser cards:
2) 4 PCIe 3.0 x8/x8 full-height, full-length (FHFL) slots;
3) 1 PCIe 3.0 x8/x8 low-profile half-length (HHHL) slot.
It is possible to replace pos.2 with a riser card:
2) 1 PCIe 3.0 x16/x16 slot and 2 PCIe 3.0 x8/x8 full-height, full-length (FHFL) slots. |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on the motherboard
Integrated Secondary SATA controller, 6 ports 6Gb/s, RAID 0/1/10.5, 1 Mini-SAS connector, 2 7-Pin SATA connectors
2 SATA connectors support SATA DOM installation with onboard power
2 x M.2 2260/2280/22110 PCIe 3.0 x4 SSD slots on expansion card (optional)
x M.2 2242/2260/2280/22110 SATA or PCIe 3.0 x4 SSD slot via riser card
Additionally RAID controllers or HBA adapters from the configurator list
4 OCuLink PCIe 3.0 x4 ports for connecting NVMe drives (2 from CPU#1, 2 from CPU#2) |
| Disk Subsystem | Up to 24 hot-swappable 2.5" SATA3/SAS3 HDD/SSD drives in front panel cage (cage without port expander)
(Including up to 4 x 2.5" NVMe drives connected to OCuLink connectors on motherboard - additional cables required)
Connecting drives with a SAS interface requires installing a SAS controller with appropriate cables.
Connecting more than 14 SATA drives requires installing an additional controller with appropriate cables.
Front Disc Basket Connectors:
- for 24 SAS3/SATA3 drives - 6 Mini-SAS HD connectors;
- for 4 NVMe drives - 4 SFF-8643 (Mini-SAS HD) connectors.
It is possible to install an additional cage for 2 2.5" SSD SAS/SATA drives in the expansion card bay on the rear panel. |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives to SATA connectors on the motherboard (optional).
M.2 drives when replacing the riser card (optional):
- 1 M.2 2242/2260/2280/22110 drive with PCIe 3.0 x4 interface;
- 1 M.2 2242/2260/2280/22110 drive with SATA interface.
(Possible combinations: 2 x 2242/2260, 1 x 2242 + 1 x 2280, 1 x 22110.)
M.2 drives with expansion card installed (optional):
- 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface.
HHHL format solid state drives in expansion slots (optional). |
| Optical Storage | External only via USB port |
| Interfaces | 2 DB-15 video connectors, rear panel and internal on system board
4 x 10GbE RJ-45 network ports, rear panel
1GbE RJ-45 management port, rear panel
5 USB 3.0 ports: 2 rear, 2 internal, 1 Type A port
x DB-9 serial port on rear panel |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller
Compatible graphics adapters (up to two per server):
- PNY Nvidia Quadro P5000, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Quadro P6000, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended |
| Computing Modules | Compatible GPU-based computing modules (maximum two per server):
PNY Nvidia Tesla V100 GPU, limitations: CPU up to 165W, ambient temperature not higher than 25°C, SSD recommended
- PNY Nvidia Tesla M60 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla M10 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla P100 GPU, limitations: CPU up to 165W, ambient temperature not higher than 25°C, SSD recommended
PNY Nvidia Tesla P40 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended
- PNY Nvidia Tesla P4 GPU, limitations: CPU up to 165W, ambient temperature not higher than 30°C, SSD recommended |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, Network activity LEDs, System Overheat LED, Fan fail LED, UID LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | x Redundant Hot-Swap Power Supplies 1000W 80 Plus Titanium Level (96%) |
| System Cooling | 4 x 80x80x38mm hot swappable system fans, 9500RPM |
| Dimensions | Height 8.9 cm, width 43.7 cm, depth 70.6 cm |
| Weight | 16.4 kg, in packaging 33 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 7.0-5.0 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |
|