| Characteristic |
Description |
 |  |
| Platform | Supermicro SYS-4029GP-TRT3 Server Platform |
| Server Board | Super X11DPG-OT-CPU |
| Server Chassis | SuperChassis CSE-418GTS-R4000B |
| Form Factor | 4U, rack mountable High-performance workstation/server with the ability to install up to 8 NVIDIA GPUs |
| Processor | 1 or 2 Intel Xeon Scalable processors with a maximum TDP of 205W Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies Interprocessor interface UPI 9.6-10.4GT/s (2 links supported), 48 PCIe 3.0 lanes, DMI 3.0 Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC) |
| Chipset | Intel C622 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU) Maximum capacity: for RDIMM - 768 GB, for LRDIMM - 3072 GB Six-channel memory controller, 24 DIMM slots (12 per CPU, 2 slots per channel) Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933 MT/s) per processor |
| Network Controller | Integrated Intel 10Gb Ethernet RJ-45 Network Controller, 2 ports, C622 Dedicated management port based on Realtek RTL8201N PHY (dedicated IPMI) |
| Expansion Slots | 9 x PCIe 3.0 x16/x16 full-height slots for double-width expansion cards (Xeon Phi/GPU) 2 x16/x16 PCIe 3.0 full-length slots for standard-width expansion cards x8/x16 PCIe 3.0 full-height slot for standard-width expansion cards |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on the motherboard Integrated Secondary SATA controller, 1 port 6Gb/s, RAID 0/1, 1 connector 7-Pin SATA (SATA connector supports installation of SATA DOM with built-in power) x PCIe 3.0 x4 NVMe SSD slots on motherboard, from CPU#2 1 x M.2 2260/2280/22110 PCIe 3.0 x4 SSD slot on motherboard Additionally RAID controllers or HBA adapters from the configurator list |
| Disk Subsystem | Up to 24 hot-swappable 2.5" SATA/SAS HDD/SSD 12Gb/s drives, including 4 NVMe drives Disk cage without port expander |
| Additional Storage | SATA DOM Drive 1 x M.2 2260/2280/22110 PCIe 3.0 x4 drive, optional 1 or 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card) |
| Optical Storage | No |
| Interfaces | DB-15 video connector, rear panel 2 x 10GbE RJ-45 network ports, rear panel RJ-45 management port, rear panel 4 USB 3.0 ports on the rear panel |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller Up to 9 NVIDIA/Intel Xeon Phi GPUs, requires dual CPUs |
| Computing Modules | Up to 9 computing modules: - NVIDIA Tesla K80/K40/M40 - Intel Xeon Phi x100 |
| Control Panel | Control buttons: Power On/Off, System Reset LED indication: Power, HDD activity, Network activity, System Overheat/Power fail |
| Management and Monitoring | Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0) Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 BMC |
| Supported Operating Systems | Current list |
| Power Unit | 4 x 2000W 80 Plus Titanium hot swappable power supplies, PMBus |
| System Cooling | 8 x 92mm redundant, hot-swappable system fans |
| Dimensions | Height 17.8 cm (4U), width 43.7 cm, depth 73.3 cm |
| Weight | 36.2 kg |
| Power Supply Parameters | 100-240 VAC, 9.5A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C Storage temperature from -40°C to +70°C Operating relative humidity from 8% to 90% Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |