| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-5019P-M Server Platform |
| Server Board | Super X11SPM-F |
| Server Chassis | SuperChassis 813MFTQC-350CB |
| Form Factor | 1U, rack mountable |
| Processor | 1 Intel Xeon Scalable processor with a maximum TDP of 165W
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies
Interprocessor interface UPI 9.6-10.4GT/s (2 links), 48 PCIe 3.0 lanes, DMI 3.0
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC) |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU)
Maximum capacity: for RDIMM - 192 GB, for LRDIMM - 768 GB
Six-channel memory controller, 6 DIMM slots
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) |
| Network Controller | Integrated network controller, 2 ports 1Gb Ethernet RJ-45
based on Marvell 88E1512 Dual port GbE LAN
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | x PCIe 3.0 x16/x16 full-height half-length (FHHL) via riser card |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on the motherboard
Integrated Secondary SATA controller, 4 ports 6Gb/s, RAID 0/1/10/5, 4 7-pin SATA connectors on the motherboard
2 SATA connectors support SATA DOM installation with onboard power
1 x M.2 2242/2280 PCIe 3.0 x4 SSD slot on motherboard
1 USB 3.0 (Type A) on motherboard for eUSB storage
Additionally, a RAID controller or HBA adapter from the configurator list |
| Disk Subsystem | Up to 4 hot-swappable 3.5" SATA3/SAS3 HDD/SSD in front panel cage
It is possible to install 2.5" SATA/SAS HDD/SSD drives via a 2.5"->3.5" adapter sled
Additionally, up to 2 x 2.5" SATA SSD drives with fixed installation in DVD and/or FDD bays (requires installation kit) |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives, optional
1 x M.2 2242/2280 PCIe 3.0 x4 drive, optional
1 or 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card) |
| Optical Storage | SATA DVD-RW Optical Drive, optional, requires installation kit |
| Interfaces | DB-15 video connector, rear panel
2 GbE RJ-45 network ports, on the rear panel
Gbe RJ-45 management port, on the rear panel
6 USB 2.0 ports: 2 rear, 4 internal (optional 2 front)
USB 3.0 ports: 2 rear, 1 internal Type A, 2 internal (optional 2 front)
1 serial port on the rear panel, 1 port - internal (optional on the front panel) |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2x Network activity LEDs, System Overheat LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | 1 x Fixed Power Supply 350W 80 Plus Platinum |
| System Cooling | 4 x 40mm fixed mount system fans
Additionally, up to 2 x 40mm fixed-mount system fans for PCIe expansion card cooling |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 50.3 cm |
| Weight | 8.0 kg, in packaging 13.8 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 4.2-1.8 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |