| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-5039MC-H12TRF Server Platform, MicroCloud Series |
| Server Board | Super X11SCE-F |
| Server Chassis | SuperChassis CSE-939HC-R2K04BP |
| Form Factor | 3U, rack mountable
12 independent servers (nodes) in a single 3U chassis with common power supply (2 x 2'000 W) and cooling subsystems. |
| Processor | For each computing node:
1 Intel Xeon E3-2100 processor, TDP 95W
FCLGA-1151 processor socket, Intel Coffee Lake architecture, 14nm process technology
Support DDR4-2666 ECC memory
Support for Intel Hyper-Threading, Intel Turbo Boost technologies |
| Chipset | For each computing node:
Intel C246 chipset |
| System Memory | For each computing node:
Memory types: ECC DDR4 Unbuffered DIMM (UDIMM) with an operating frequency of 2666MHz VLP
Maximum capacity 64 GB
Dual-channel memory controller integrated into the processor
Total 4 DIMM slots, 2 slots per channel
Memory subsystem bandwidth 43 GB/s |
| Network Controller | For each computing node:
Replacement MicroLP network module, 2-port 1GbE RJ45 module based on Intel i350 installed
Possible network interface options: 1Gb/10Gb/25Gb/40Gb Ethernet, 56Gb-FDR InfiniBand
Number of ports 1 or 2 depending on the interface type
Dedicated management port RJ45 Dedicated IPMI LAN port (common to all nodes) |
| Expansion Slots | For each computing node:
- Only MicroLP slot for network module |
| Disk Subsystem Controller | For each computing node:
Integrated SATA controller, 4 ports 6Gb/s, RAID 0/1/5/10, 1 port for SATA DOM
Two PCIe x4 ports for connecting 2.5" NVMe drives |
| Disk Subsystem | For each computing node, possible options are:
- up to 4 2.5" SATA3 6Gb/s HDD/SSD internal drives with fixed installation
- up to 2 3.5" SATA3 6Gb/s HDD internal drives with fixed installation
up to 2 2.5" SATA3 HDD/SSD drives and 1 3.5" SATA3 HDD internal drive with fixed installation
- up to 2 x 2.5" SATA3 HDD/SSD and up to 2 x 2.5" NVMe SSD internal drives with fixed installation
-1 x 3.5" SATA3 HDD and up to 2 x 2.5" NVMe SSD internal fixed mount
-1 SATA DOM drive into the slot on the motherboard
-1 M.2 SATA or PCIe 3.0 x4 2280/22110 drive into the slot on the motherboard |
| Optical Storage | External only with USB connection |
| Interfaces | For each compute node on the front panel:
- 1 or 2 network ports depending on the type of MicroLP module installed
- SUV combo connector (VGA, serial port, 2 USB 2.0 ports)
One SUV -> VGA/COM/2USB adapter is included with the platform |
| Video Adapter | For each computing node:
Integrated graphics controller based on ASPEED AST2500 BMC |
| Control Panel | For each computing node:
Control buttons: Power On/Off, UID |
| Management and Monitoring | For each computing node:
Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 BMC
Dedicated RJ-45 management port (shared between all nodes) |
| Supported Operating Systems | Current list |
| Power Unit | x 2000W 80 Plus Titanium, PMBus redundant and hot swappable power supplies |
| System Cooling | Common to all computing nodes:
4 x 92mm hot-swappable and redundant system fans |
| Dimensions | Height 13.2 cm, width 44.5 cm, depth 74.9 cm |
| Weight | 43 kg (without discs), 57 kg in packaging |
| Power Supply Parameters | 100-240 VAC, 10.0 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |