| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-530T-I Server Platform |
| Server Board | Super X12STL-F |
| Server Chassis | SuperChassis CSE-731I-404B |
| Form Factor | Midi Tower |
| Processor | 1 processor of the Intel Xeon E-2300 family with TDP up to 95W
Processor socket H5 (FCLGA-1200), Intel Rocket Lake architecture, 14nm process technology
Supports DDR4-3200 ECC-Unbuffered Memory (2 channels), maximum RAM capacity 128 GB
4, 6 or 8 physical cores, 8MB, 12MB or 16MB Intel Smart Cache
Support for Intel Turbo Boost, Intel Hyper-Threading technologies (not all processor models)
Power consumption 65-95W (depending on the processor model)
Integrated graphics controller Intel UHD Graphics P750 (not available on all models)
(for CPU models with integrated graphics, not supported on this platform) |
| Chipset | Intel C252 Chipset, 6 SATA ports, 20 PCIe 4.0 lanes |
| System Memory | DDR4-3200 ECC Unbuffered (UDIMM), dual-channel memory controller
Maximum capacity 128GB (4 x 32GB UDIMM), 4 DIMM slots, 2 slots per channel
Supported memory modes 3200 MT/s
Memory subsystem bandwidth 51.2 Gb/s |
| Network Controller | Integrated network controller, 2 ports 1Gb Ethernet RJ-45
based on Intel i210AT Dual Port Gigabit Ethernet Controller
Dedicated 1GbE RJ-45 management port
It is possible to install additional network adapters in PCIe 4.0 expansion slots (see the corresponding field in the Configurator) |
| Expansion Slots | 1 x PCIe 4.0 x8/x16 full-height (FHHL) slot
1 x PCIe 4.0 x8/x8 full-height (FHHL) slot
1 x PCIe 4.0 x4/x8 Full Height (FHHL) slot
1 x PCIe 3.0 x2/x4 full height (FHHL) slot |
| Disk Subsystem Controller | Integrated SATA controller of the Intel C252 chipset, 6 ports 6Gb/s (RAID 0/1/5/10), SATA 7-Pin connectors
(2 SATA ports with built-in power for SATA DOM)
1 x M.2 PCIe 3.0 x4 (Chipset) 2280/22110
It is possible to install a RAID controller or HBA adapter in the PCIe 3.0 x16 FH/LP expansion slot (see the corresponding field in the Configurator) |
| Disk Subsystem | Up to 4 fixed 3.5"/2.5" SATA3 HDD/SSD drives (2.5" drives via additional adapters)
Up to 4 x 2.5" SAS3/SATA3 HDD/SSD hot swappable (requires additional cage)
2 external 5.25" bays
Installation of SAS drives requires an additional RAID controller and Mini-SAS HD -> 4xSATA cables |
| Additional Storage | Up to two SATA DOM (Disk-On-Module) drives to SATA 7-Pin connectors on the motherboard
One M.2 PCIe 3.0 x4 2280/22110 (chipset connection) drive in the motherboard slot
Up to two M.2 PCIe 3.0 x4 or SATA 2280/22110 drives in expansion card (with Boot RAID 0/1 support) |
| Optical Storage | SATA DVD-RW Optical Drive, option
SATA BD-RW Optical Drive, optional |
| Interfaces | Connectors on the back panel of the server:
- DB-15 video connector
- 2 GbE RJ-45 network ports
- Dedicated RJ-45 management port
2 USB 2.0 ports
- 2 USB 3.1 Gen1 ports
- 1 serial port
Connectors on the front panel of the server:
- 2 USB 3.1 Gen1 ports |
| Video Adapter | Integrated based on Aspeed AST2600 BMC
The integrated graphics core in the processor is not supported in this server model. |
| Control Panel | Control buttons: Power, System Reset
Indication: Power LED, HDD activity LED, Network activity LED, System Information LED |
| Management and Monitoring | Support for Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, Aspeed AST2600 BMC with 10/100/1000Mbps |
| Supported Operating Systems | Current list |
| Power Unit | 1 x Fixed Power Supply 400W 80 Plus Gold |
| System Cooling | x 92mm rear low noise system fan
optional 80mm fixed mount fan for cooling expansion boards |
| Dimensions | Height 36.2 cm, width 18.4 cm, depth 42.5 cm |
| Weight | 7.3 kg, 9.1 kg per pack |
| Power Supply Parameters | 100-240 VAC, 5 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +70°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |