| Characteristic |
Description |
 | |
| Platform | Supermicro SYS-6019P-WTR Server Platform |
| Server Board | Super X11DDW-L |
| Server Chassis | SuperChassis 815TQC-R706WB2 |
| Form Factor | 1U, rack mountable |
| Processor | 1 or 2 Intel Xeon Scalable processors with a maximum TDP of 165W (high-frequency (>3GHz) CPUs with a TDP of 150W are not supported by the platform)
Processor socket Socket P (LGA 3647), Intel Skylake (Gen1) / Cascade Lake (Gen2) architecture, 14nm process technology
ECC memory support, up to 28 cores, frequency up to 3.8 GHz, up to 38.5 MB L3 cache per processor, 1 MB L2 per core
Support for Intel Hyper-Threading, Intel Turbo Boost, AVX-512 (1 or 2 FMA) technologies
Interprocessor interface UPI 9.6-10.4GT/s (2 links), 48 PCIe 3.0 lanes, DMI 3.0
Supports DDR4-2133/2400/2666/2933 memory, up to 1TB/2TB/4.5TB (with index "x"/"M"/"L", on CPU), six-channel memory controller (IMC)
The following high frequency processors are not supported by this platform due to thermal limitations:
Intel Xeon Gold 6244, 6246. |
| Chipset | Intel C621 Chipset |
| System Memory | Memory types: ECC DDR4 Registered DIMM (RDIMM), ECC DDR4 Load Reduced DIMM (LRDIMM) with an operating frequency of 2133/2400/2666/2933MHz (depending on the CPU)
Maximum capacity: for RDIMM - 384 GB, for LRDIMM - 1536 GB
Six-channel memory controller, 12 DIMM slots (6 per processor)
Memory subsystem bandwidth 102/115/128/141 GB/s (2133/2400/2666/2933) per processor |
| Network Controller | Integrated network controller, 2 ports 1Gb Ethernet RJ-45
based on Intel C621 (X722) chipset
Dedicated management port RJ45 Dedicated IPMI LAN port |
| Expansion Slots | 1 x PCIe 3.0 x16/x16 full-height half-length (FHHL) slot from CPU#1 via riser card
1 x PCIe 3.0 x16/x16 full-height half-length (FHHL) slot from CPU#2 via riser card
1 PCIe 3.0 x8/x8 low profile (LP) slot from CPU#2, via riser card
PCIe 3.0 x16 slot from CPU#1 on motherboard for installing RAID module (Add-on-Module, AOM) |
| Disk Subsystem Controller | Integrated Primary SATA controller, 8 ports 6Gb/s, RAID 0/1/10/5, 2 Mini-SAS connectors on the motherboard
Integrated Secondary SATA controller, 6 ports 6Gb/s, RAID 0/1/5/10, 1 Mini-SAS connector, 2 7-Pin SATA connectors
2 SATA connectors support SATA DOM installation with onboard power
1 x M.2 2242/2260/2280/22110 PCIe 3.0 x4 SSD slot on motherboard
Supermicro RAID module in a slot on the motherboard - AOM-S3108M-H8, LSI3108, 8P(int) SAS3 12Gb, 2GB, 0/1/10/5/50/6/60
Additionally, a RAID controller or HBA adapter from the configurator list |
| Disk Subsystem | Up to 4 hot-swappable 3.5" SATA/SAS HDD/SSD drives in front panel cage
It is possible to install 2.5" SATA/SAS HDD/SSD drives via a 2.5"->3.5" adapter sled
Additionally, up to 2 x 2.5" SATA SSD drives with fixed installation in DVD and/or FDD bays (requires installation kit) |
| Additional Storage | Up to 2 SATA DOM (Disk-On-Module) drives, optional
1 x M.2 2242/2260/2280/22110 PCIe 3.0 x4 drive, optional
1 or 2 M.2 2260/2280/22110 drives with PCIe 3.0 x4 interface when installing an additional cage (PCIe 3.0 x8 expansion card) |
| Optical Storage | SATA DVD-RW Optical Drive, optional, requires installation kit |
| Interfaces | DB-15 video connector, rear panel
2 GbE RJ-45 network ports, on the rear panel
Gbe RJ-45 management port, on the rear panel
6 USB 3.0 ports: 4 rear, 2 internal (optional 2 front) |
| Video Adapter | Integrated ASPEED AST2500 BMC Graphics controller |
| Control Panel | Control buttons: Power On/Off, System Reset
Indication: Power LED, HDD activity LED, 2x Network activity LEDs, System Overheat LED |
| Management and Monitoring | Intelligent Platform Management Interface v.2.0 (IPMI 2.0)
Virtual media over LAN, KVM-over-LAN, ASPEED AST2500 Base Management Controller (BMC)
Monitoring voltages, temperatures, fan speeds |
| Supported Operating Systems | Current list |
| Power Unit | 2 x 750W 80 Plus Platinum Hot-Swap Redundant Power Supplies |
| System Cooling | 4 x 40mm fixed mount dual rotor system fans
Additionally, up to 2 x 40mm fixed-mount system fans for cooling PCIe expansion cards |
| Dimensions | Height 4.3 cm, width 43.7 cm, depth 59.7 cm |
| Weight | 13.0 kg, in packaging 20.9 kg (platform only) |
| Power Supply Parameters | 100-240 VAC, 4.2-1.8 A, 50-60 Hz |
| Operating Environment | Operating temperature from +10°C to +35°C
Storage temperature from -40°C to +60°C
Operating relative humidity from 8% to 90%
Relative humidity during storage from 5% to 95% |
| Warranty | Standard 36 months warranty, service at the service center |